Table of Contents
Advertisement
8
Press the
or
ue at the blinking cursor. The value can be set be-
tween 0 and 50. Use the
cursor right and left.
9
When the desired maximum number of jobs is set,
press the ENTER key.
10
Press the MENU key. The display returns to Ready.
Maximum Space Assigned to Temporary Code
Jobs
This changes the hard disk space that holds temporary code
jobs. The default size is about 1/6 of the total hard disk
space. For example, the default size is 50 MB for 340 MB
hard disk and 150 MB for 1 GB hard disk. The actual maxi-
mum size depends on the size of free hard disk space, howev-
er.
1
Press the MENU key.
2
Press the
or
pears.
e-MPS
3
Press the
key.
4
Press the
or
Configuration > appears.
>e-MPS
Configuration
5
Press the
key.
6
Press the
or
Code JOB Size appears.
>>Temp. Code JOB
Size
0150MB
7
To change the maximum disk space, press the EN-
TER key. A blinking cursor (_) appears.
>>Temp. Code JOB
Size
0150MB
8
Press the
or
spectively, the value at the blinking cursor. Use the
and
keys to move the cursor right and left. You
can change the maximum space from 0 to 9999
(megabytes).
key to increase or decrease the val-
and
keys to move the
key repeatedly until e-MPS > ap-
>
key repeatedly until >e-MPS
>
key repeatedly until >>Temp.
key to increase or decrease, re-
Chapter 1 Using the Operator Panel
9
Press the ENTER key.
10
Press the MENU key. The display returns to Ready.
Maximum Space Assigned to Permanent Code
Jobs
This changes the hard disk space that holds permanent code
jobs. The default size is about 1/6 of the total hard disk
space. For example, the default size is 50 MB for 340 MB
hard disk and 150 MB for 1 GB hard disk. The actual maxi-
mum size depends on the size of free hard disk space, howev-
er.
1
Press the MENU key.
2
Press the
or
e-MPS
3
Press the
key.
4
Press the
or
Configuration > appears.
>e-MPS
Configuration
5
Press the
key.
6
Press the
or
JOB Size.
>>Perm. Code JOB
Size
0150MB
7
Press the ENTER key, the message display shows a
blinking cursor (_).
>>Perm. Code JOB
Size
0150MB
8
Press the
or
spectively, the value at the blinking cursor. Use the
and
keys to move the cursor right and left. You
can change the maximum space from 0 to 9999
(megabytes).
9
Press the ENTER key.
10
Press the MENU key and the message display re-
turns to Ready.
key and select e-MPS >.
>
key repeatedly until >e-MPS
>
key and select >>Perm. Code
key to increase or decrease, re-
1-41
Advertisement
Table of Contents
