Overriding A4 And Letter Size Difference - Kyocera Mita Ecosys FS-6020 Operation Manual

Chapter 1 Using the Operator Panel

Overriding A4 and Letter Size Difference

This selects whether or not to make the difference between A4
size and Letter size. Under the default setting of Off, the pa-
per size of the paper source is matched to the paper size for-
matting the jobs. If these differ, a corresponding error
message is displayed. When this is set to On, printing is per-
formed whenever either A4 or Letter size paper is loaded in
the paper source, even if the actual paper size differs from the
paper size formatting the jobs.
1 Press the MENU key.
2 Press the or
Handling > appears.
Paper Handling >
3 Press the key.
4 Press the or
A4/LT appears.
>Override A4/LT
Off
5 Press the ENTER key. A blinking question mark (?)
appears.
>Override A4/LT
? Off
6 Select On or Off using the
7 Press the ENTER key.
8 Press the MENU key. The message display returns to
Ready.
1-24
key repeatedly until Paper
key repeatedly until >Override
or key.