Table of Contents
Advertisement
Paper Handling >
3
Press the
key.
4
Press the
or
Type appears.
>MP Tray Type
Plain
5
Press the ENTER key. A blinking question mark (?)
appears.
>MP Tray Type
? Plain
6
Press the
or
paper type. The display changes as shown below.
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
Custom1(to 8)*
* You can define and register a desired paper type to the
printer in advance. See
below for details.
7
When the desired MP tray paper type is displayed,
press the ENTER key.
8
Press the MENU key and the message display re-
turns to Ready.
Customizing Paper Type
The following describes the procedure used to set a user-de-
fined paper type for the printer. Eight custom user settings
may be registered. Once registered, any of these may be
called up when setting the paper type for a paper source.
The paper weight and duplex path can be set (see
Paper Weight
below and
20
). To reset the customized settings, see
Adjust on page 1-21
.
key repeatedly until >MP Tray
key to display the desired MP tray
Customizing Paper Type
Setting the
Setting the Duplex Path on page 1-
Resetting the Type
Chapter 1 Using the Operator Panel
1
Press the MENU key.
2
Press the
or
key repeatedly until Paper
Handling > appears.
Paper Handling >
3
Press the
key.
4
Press the
or
key repeatedly until >Type
Adjust > appears.
>Type Adjust
Custom 1
5
Press the ENTER key. A blinking question mark (?)
appears.
>Type Adjust
? Custom 1
6
Press the
or
key to display the desired paper
type. The display changes as shown below.
Custom1(to 8)
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
7
When the paper type to be customized is displayed,
press the ENTER key.
8
Press the
key and proceed to
Weight
Setting the Duplex Path on
below and
page 1-20
.
>
Setting the Paper
1-19
Advertisement
Table of Contents
