Table of Contents
Advertisement
Chapter 1 Using the Operator Panel
11
To set the KC-GL page size, press the
press the
or
displayed.
12
To change the page size, press the ENTER key. A
blinking question mark (?) appears.
>KC-GL Page Set
? [SPSZ]
Press the
or
page size (A2, A1, A0, B3, B2, B1, B0, and SPSZ)
appears. When selecting SPSZ, printing will be done
with the paper size specified by the PRESCRIBE
SPSZ command. For details, see
Manual
in the CD-ROM.
13
Press the ENTER key to set the page set you just se-
lected.
14
Press the MENU key. The message display returns to
Ready.
Alternative Emulation for KPDL Emulation
NOTE
To use this function, It is recommended that you install expan-
sion memory of 16 MB or more (total printer memory 32 MB or
more).
The auto KPDL (KPDL (AUTO)) emulation enables the print-
er to automatically change the emulation mode according to
the print job received. The alternative emulation can be se-
lected using the operator panel. The default alternative emu-
lation is PCL 6.
1
Press the MENU key.
2
Press
the
or
appears.
Emulation
PCL 6
3
Press the ENTER key. A blinking question mark (?)
appears.
Emulation
? PCL 6
1-26
key, then
key until >KC-GL Page Set is
key repeatedly until the desired
Programming
key repeatedly until Emulation
4
Press the
or
display KPDL (AUTO) appears.
Emulation
? KPDL (AUTO)
5
Press the ENTER key.
6
Press the
key. When > Print KPDL Errs is dis-
played, press the
through the emulation in the following order:
PCL 6 (default)
KC-GL
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
Epson LQ-850
7
Press the ENTER key. A blinking question mark (?)
appears.
>Alt. Emulation
? PCL 6
8
Press the
or
alternative emulation appears.
9
Press the ENTER key.
10
Press the MENU key. The message display returns to
Ready.
Printing KPDL Errors
The printer can print error descriptions when printing error
occurs during KPDL emulation. The default is Off - the print-
er does not print KPDL errors.
1
Press the MENU key.
2
Press
the
or
appears.
Emulation
PCL 6
key repeatedly until the message
or
key. The display cycles
key repeatedly until the desired
key repeatedly until Emulation
Advertisement
Table of Contents
