Table of Contents
Advertisement
Please read the Operation Guide before using the printer.
Keep it close to the printer for easy reference.
The sections of this guide and parts of the printer marked with
symbols are safety warnings meant to protect the user, other
individuals and surrounding objects, and ensure correct and
safe usage of the printer. The symbols and their meanings are
indicated below.
WARNING: Indicates that serious injury or even death may
result from insufficient attention to or incorrect compliance with
the related points.
CAUTION: Indicates that personal injury or mechanical
damage may result from insufficient attention to or incorrect
compliance with the related points.
Symbols
The
symbol indicates that the related section includes safety
warnings. Specific points of attention are indicated inside the
symbol.
........ [General warning]
........ [Warning of danger of electrical shock]
........ [Warning of high temperature]
The
symbol indicates that the related section includes
information on prohibited actions. Specifics of the prohibited
action are indicated inside the symbol.
........ [Warning of prohibited action]
......... [Disassembly prohibited]
The
symbol indicates that the related section includes
information on actions which must be performed. Specifics of
the required action are indicated inside the symbol.
......... [Alert of required action]
........ [Remove the power plug from the outlet]
........ [Always connect the printer to an outlet
with a ground connection]
Please contact your service representative to order a
replacement if the safety warnings in the guide are illegible or if
the guide itself is missing. (fee required)
Caution
NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY
IMPROPER INSTALLATION.
Notice on Software
SOFTWARE USED WITH THIS PRINTER MUST SUPPORT
THE PRINTER'S EMULATION MODE. The printer is factory-set
to emulate the PCL. The emulation mode can be changed by
following the procedures described in
Notice
The information in this guide is subject to change without
notification. Additional pages may be inserted in future editions.
The user is asked to excuse any technical inaccuracies or
typographical errors in the present edition.
No responsibility is assumed if accidents occur while the user is
following the instructions in this guide. No responsibility is
assumed for defects in the printer's firmware (contents of its
read-only memory).
This guide, any copyrightable subject matter sold or provided
with or in connection with the sale of the page printer, are
protected by copyright. All rights are reserved. Copying or other
reproduction of all or part of this guide, any copyrightable
subject matter without the prior written consent of Kyocera Mita
Corporation is prohibited. Any copies made of all or part of this
guide, any copyrightable subject must contain the same
copyright notice as the material from which the copying is done.
Regarding Tradenames
PRESCRIBE is a registered trademark of Kyocera Corporation.
KPDL and KIR (Kyocera Image Refinement) are trademarks of
Kyocera Corporation.
Diablo 630 is a product of Xerox Corporation. IBM Proprinter
X24E is a product of International Business Machines
Corporation. Epson LQ-850 is a product of Seiko Epson
Corporation.
Hewlett-Packard, PCL, and PJL are registered trademarks of
Hewlett-Packard Company. Centronics is a trade name of
Centronics Data Computer Inc. PostScript is a registered
trademark of Adobe Systems Incorporated. Macintosh is a
registered trademark of Apple computer, Inc. Microsoft,
Windows, and Windows NT are registered trademarks of
Microsoft Corporation. PowerPC and Microdrive are
trademarks of International Business Machines Corporation.
CompactFlash is a trademark of SanDisk Corporation.
ENERGY STAR is a U.S. registered mark. All other brand and
product names are registered trademarks or trademarks of their
respective companies.
This Kyocera page printer uses PeerlessPrintXL to provide the
HP LaserJet compatible PCL 6 language emulation.
PeerlessPrintXL is a trademark of The Peerless Group,
Redondo Beach, CA 90278, U.S.A.
This product was developed using the Tornado™ Real Time
Operating System and Tools from Wind River Systems.
Contains UFST™ and MicroType
Corporation.
Chapter
1.
®
from Agfa
1
Advertisement
Table of Contents
