Kyocera Mita Ecosys FS-6020 Operation Manual page 93

Page printer
Hide thumbs Also See for Ecosys FS-6020:
Table of Contents

Advertisement

Appendix B Option Units
PF-400 Paper Feeder
Holds up to 250 sheets of A3, B4, A4 (long-edge feed), A4R
(Short-edge feed), B5, A5, and OTHER (148 to 297 mm × 216
to 432 mm) size paper. Up to four paper feeders can be
attached to the bottom of the printer.
DU-400 Duplexer
Enables duplex printing. This is installed at the rear of the
printer.
Network Interface Card
Is used to communicate using the network protocols such as
NetWare, TCP/IP or EtherTalk. This allows various types of
computers (Windows, UNIX, Macintosh, etc.) to print via
network. This is installed at the rear of the printer.
Hard Disk Unit
Enables such e-MPS functions as the electronic sorting and
job retention functions. This is installed into the slot designed
for it on the main circuit board of the printer. See your dealer
for purchasing information regarding the hard disk units that
are best suited for use with this printer.
Memory Card (CF)
This is a microchip card that may contain option fonts,
macros, and forms. Insert the memory card into the memory
card slot located on the rear of the printer. See your dealer for
purchasing information regarding the memory cards that are
best suited for use with this printer.
Expansion Memory DIMM
This is installed into the expansion memory slot located on
the main circuit board of the printer. See your dealer for
purchasing information of the DIMMs that are best suited for
use with this printer.
IB-11 Serial Interface Board
Connect to the computer's serial printer port with a serial
cable.
B-2

Advertisement

Table of Contents
loading

Table of Contents