Pagenation; Changing Emulation; Kc-Gl Pen Width - Kyocera Mita Ecosys FS-6020 Operation Manual

Pagenation

The items regarding:

•Changing Emulation

•Setting Default Font
•Setting Code Set
•Setting Number of Copies
•Selecting Reduced Print
•Selecting Printing Orientation
•Setting KIR Mode
•Setting EcoPrint
•Setting Resolution
Changing Emulation
The emulation mode for the current interface can be changed.
1 Press the MENU key.
2 Press the or
appears. One of the emulation names shown below
appears, indicating the current emulation.
PCL 6 (default)
KC-GL
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
Epson LQ-850
3 Press the ENTER key. A blinking question mark (?)
appears.
Emulation
?PCL 6
4 Press the or
emulation mode appears.
5 Press the ENTER key. The
sub-menu >Code Set.
6 Press the MENU key. The message display returns to
Ready.
After changing the emulation, you have the option to
change the character code set. Available character
code sets vary depending on the current emulation.

KC-GL Pen Width

The KC-GL emulation mode enables you to set the pen
widths in dots, for pen numbers 1 to 8, and the KC-GL page
size.
1 Press the MENU key.
key repeatedly until Emulation
key repeatedly until the desired
key allows access to
Chapter 1 Using the Operator Panel
2 Press the or
appears on the message display.
Emulation
PCL 6
If the current emulation is other than KC-GL, press
3
the ENTER key. A blinking question mark (?) ap-
pears.
Emulation
?PCL 6
4 Press the or
pears.
Emulation
?KC-GL
5 Press the ENTER key.
Emulation
KC-GL
6 Press the key to move to the >KC-GL > Pen
Width submenu.
>KC-GL
Pen Width
7 Press the key.
>>Pen(1) Width
01 dot(s)
8 Press the or
pen number of 1 to 8 appears.
9 When the desired pen number is displayed, press the
ENTER key.
10 To change the pen width, press the
press the ENTER key. A blinking cursor (_) appears
at the width value.
>>Pen(1) Width
02 dot(s)
Press the or
pen width in dots (00 to 99) appears. When the
desired pen width is displayed, press the ENTER
key.
key repeatedly until Emulation
key repeatedly until KC-GL ap-
>
>
key repeatedly until the desired
key, then
key repeatedly until the desired
1-25