Table of Contents
Advertisement
Chapter 1 Using the Operator Panel
Selecting Printing Orientation
You can select the portrait or landscape page orientation. The
page orientation can be set whenever the message display in-
dicates Ready.
A B C
Portrait
1
Press the MENU key.
2
Press the
or
appears.
Page Set
3
Press the
key.
4
Press the
or
>Orientation appears.
>Orientation
Portrait
5
Press the ENTER key. A blinking question mark (?)
appears.
>Orientation
? Portrait
6
Select Portrait or Landscape using the
key.
7
Press the ENTER key.
8
Press the MENU key. The message display returns to
Ready.
1-32
Landscape
key repeatedly until Page Set >
>
key repeatedly until
Setting KIR Mode
This printer incorporates the KIR (Kyocera Image Refine-
ment) smoothing function. KIR users software to enhance
resolution, resulting in high quality printing at resolution of
600 dpi and 300 dpi. The default is On. KIR has no effect on
the printing speed.
NOTE
Set the print density to 03 when setting the KIR mode. For details
on print density, see
You can monitor the KIR test pattern, the last line on a status
page, to make the optimum KIR mode setting.
Look at the check line, the last line on a status page, to make
the optimum KIR mode setting.
Status Page
KIR Test Pattern
or
With KIR Off
With KIR On (default)
Verifying Total Printed Pages on page
FS-6020 Page Printer
STATUS PAGE
Firmware Version:
Released:
Hardware Information
Memory
Page Information
Installed Options
Network Status
Emulation
Error Log
Toner Gauge
100
0
Interfaces
KIR
Test pattern
ON
Optimized stripes
The current KIR setting is optimal.
Dark vertical stripes
Set the KIR mode to Off. Try printing
the status page again. If you still get
dark vertical stripes, adjust the print
density control to a lighter setting.
White vertical stripes
Set the KIR mode to On. Try printing
the status page again. If you still get
white vertical stripes, adjust the print
density control to a darker setting.
1-52.
Advertisement
Table of Contents
