Table of Contents
Advertisement
Glossary
Printer driver
The printer driver makes it possible for you to print data
created using application software. The printer driver for
either the printer is on the Kyocera Mita Digital Library CD-
ROM supplied with the printer. Install the printer driver on
the computer connected to the printer.
RAM disk
This is a virtual disk drive that uses part of the printer's
memory. With RAM disk you can set any memory size
arbitrarily, and use electronic sorting (to reduce print time).
Simple Network Management Protocol (SNMP)
This is a protocol for the management of networks that use
TCP/IP (Transmission Control Protocol/Internet Protocol).
Sleep mode
This mode is activated after a specified amount of time
elapses. The printer goes into economy mode and a minimum
amount of power is consumed. You can change the amount of
time before the printer goes into sleep mode from the printer's
operator panel. The default setting is 15 minutes.
Status page
This lists printer conditions, such as the printer's memory,
the total number of copies printed, and paper source settings.
Glossary-2
Advertisement
Table of Contents
