Table of Contents
Advertisement
>List of
Partitions
5
Press the ENTER key. A question mark (?) appears.
>List of
Partitions ?
6
Press the ENTER key. Processing appears and the
printing of the list starts.
PARTITION LIST
The printout (example above) includes the following
information:
Device Name/
MEMORY CARD/A is indicated for
Number:
the memory card.
The total capacity of the memory
Capacity:
card in bytes.
The total size of the data stored in
Used Space:
the memory card in bytes.
The size of the capacity remaining
Free Space:
in the memory card for storing
further data, including the amount
of memory that the printer uses for
its system.
Partition Name: The name of the written data
assigned automatically by the
printer.
The size of the written data in
Partition Size:
bytes.
The type of the written data i.e.,
Partition Type:
whether it is host data (Data) or
font data (Font).
When the list of file names (partition list) for the
memory card is printed, the message display returns
to Ready.
Device Information
Partition Information
Chapter 1 Using the Operator Panel
Operating Option Hard Disk
Installing the option hard disk into the printer allows you to
perform the following operations on the hard disk.
•Reading data
•Writing data
•Deleting data
•Formatting hard disk
•Printing a list of data names (partitions)
When an option hard disk is inserted into the printer for the
first time, it must be formatted before use. If the option hard
disk is not formatted, the >Format menu will automatically
appear on the message display.
The operations of the option hard disk are the same as those
of the memory card. See the relevant sections in
Memory Card on page 1-46
The formatted hard disk is automatically assigned a data
name including the leteer "H" such as DataH001 (instead of
DataS001).
Operating
.
1-49
Advertisement
Table of Contents
