Selecting Monochrome Or Color Printing - Kyocera Mita WP31C Operation Manual

3.11

Selecting Monochrome or Color Printing

You can use the Color Mode menu on the operator panel to select the Monochrome or Color
printing mode. By default, the printer is set to print in color mode. To change it to
monochrome mode, proceed as follows:
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Color Mode
Color
3 3 3 3
To change color mode, press the ENTER key. A blinking question mark (?) appears.
Color Mode
? Color
4 4 4 4
Press the or
5 5 5 5
When the desired color mode is displayed, press the ENTER key. Color mode is
changed.
6 6 6 6
To exit the menu selection, press the MENU key.
3.11 Selecting Monochrome or Color Printing
key repeatedly until Color Mode appears.
key to change color mode — Color or Monochrome.
3-85