2
2.3
Connections of the image controller
You can use the copier as a printer by connecting image controller to a computer (using with USB connection)
or a network (using with Ethernet connection).
2.3.1
Ethernet connection
You can also connect the copier to computers supporting Ethernet.
Several alternatives can be considered in the Ethernet connection. In any of them, you must set up the printer
driver in each computer after configuring the network (such as TCP/IP settings) for the image controller or the
computers.
The following print patterns are shown here as examples.
-
SMB printing, lpr/lpd printing, Direct printing, Raw (Port9100, Setting can be made for up to 6 ports)
printing, Web service print
-
Printing in which AppleTalk, Bonjour from Macintosh is used.
(An optional PS expansion kit will be required.)
-
IPP (Internet Printing Protocol) printing
-
Printing in which Novell NetWare is used.
2.3.2
USB connection
The USB interface can be connected to a computer.
2-6
Overview
bizhub PRO 950 (Version 2)