Network Connection (Web Service Print) - Konica Minolta bizhub pro 950 User Manual

Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
8
Click the [Have Disk].
9
Click the [Browse].
10
Specify the desired folder on the Driver CD or PS Driver CD that contains the printer driver, and then
click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
11
Click the [OK].
The "Printer" list appears.
12
Click the [Next].
13
Follow the on-screen instructions.
– If the "User Account Control" window appears, click the [Continue].
14
Click the [Finish].
15
When the installation is completed, make sure that the icon of the installed printer appears in the
Printers window.
16
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
3.2.3

Network connection (Web Service print)

In Windows Vista/Server 2008, Web Service print-supporting printers on the network can be located and
installed.
TCP/IP setting for this machine
Specify the IP address on TCP/IP Setting of this machine.
For details on specifying the IP address of this machine, refer to the User's Guide [POD Administrator's
Reference].
Web Service setting for the copier
Enable Web Service printing in "Web Service Setting" of the copier.
For details on specifying the Web Service Setting of this machine, refer to the User's Guide [POD
Administrator's Reference].
Install a printer through the network window
0 The installation should be performed by a qualified system administrator or printer administrator.
1
Turn on the power of the machine while it is connected to the network.
– To allow printers to be detected during installation, the machine must be connected to the network.
2
To use the Web Service print, check that "Network discovery" is enabled in "Network and Sharing
Center" on the computer.
3
Insert the Driver CD into the CD-ROM drive of the computer.
4
Click the [Start] button, and then click "Network".
The Network window appears, showing the computers and devices on the network.
5
Select the device name of the copier, and then click "Install" from the toolbar.
The selected Web Service print-supporting printer is found, and then the Found New Hardware Wizard
dialog box appears.
6
Click [Locate and install driver software (recommended)].
A screen for confirming the search method appears.
bizhub PRO 950 (Version 2)
3
3-7