Local Connection - Konica Minolta bizhub pro 950 User Manual

3
3.2.4

Local connection

When this machine is connected via a USB port, the printer driver can be installed with plug-and-play.
1
Connect the copier to a computer using a USB cable, and then start up the computer.
2
Turn on the main power of the copier.
– The Found New Hardware Wizard dialog box appears.
– If the Found New Hardware Wizard dialog box does not appear, turn off the copier, then on again.
– When turning off the power, then on again, wait at least 10 seconds before turning it on again.
Otherwise, this machine may not function properly.
3
Set the "Driver CD or PS Driver CD" in the CD-ROM drive.
4
Click "Locate and install the driver software (recommended)".
– If the Windows connect to Windows Update dialog box appears, select "NO".
5
From "Search for the best driver in these locations," select "Include this location in the search", and
then click the [Browse].
6
Specify the desired folder on the Driver CD or PS Driver CD that contains the printer driver, and then
click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
7
Click [Next] and follow the on-screen instructions.
– If the "User Account Control" window appears, click the [Continue].
8
Click the [Finish].
9
When the installation is completed, make sure that the icon of the installed printer appears in the
Printers window.
10
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
3-10
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
bizhub PRO 950 (Version 2)