Konica Minolta bizhub pro 950 User Manual page 57

Installation of the printer driver (Macintosh)
Specifying the LPR settings
Specifying the TCP/IP setting for this machine:
Specify the IP address of this machine.
LPD setting for the copier:
To use LPR printing, enable LPD print in the LPD Setting screen of the copier.
For details on the IP Address and the LPD settings of this machine, refer to the User's Guide [POD
Administrator's Reference].
Specifying the TCP/IP setting for the computer
1
On the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
4
Click the TCP/IP tab.
5
Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.
6
Click the close button at the upper left corner of the dialog box.
– When the "Apply configuration changes?" message appears, click the [Apply].
Adding a printer
1
Select "HDD" - "Applications" - "Utilities" where the driver was installed, and then double-click "Printer
Setup Utility" to open it.
2
When the Add Printer dialog box appears, click the [Add]. When the printer list appears, click the [Add].
3
Click the [IP Printing].
4
Select "LPD/LPR" from "Printer Type".
5
In "Address", enter the IP address of this machine.
6
Select "KONICA MINOLTA" in "Printer Model", select the desired model from the list of models, and
then click the [Add].
– If the selected printer is registered in the printer list, the setting procedure is completed.
Specifying the IPP settings
Specifying the TCP/IP setting for this machine:
Specify the IP address of this machine.
IPP setting for the copier:
Enable IPP print in the IPP Setting screen of the copier.
For details on IP Address and the IPP settings of this machine, refer to the User's Guide [POD Administrator's
Reference].
Specifying the TCP/IP setting for the computer
1
On the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
4
Click the TCP/IP tab.
bizhub PRO 950 (Version 2)
4
4-9