Konica Minolta bizhub pro 950 User Manual page 175

PostScript PPD printer driver setting (Windows)
4
Click [OK] to close the [Printing Preferences].
5
Click [Print] to perform printing from the application.
– When the [Wait Mode] is selected, it stops without being printed.
– When the [Proof and Print] is selected, only one set is printed and it stops.
On the copier's control panel, the Mode Check screen appears.
6
In case of [Proof and Print], [MACHINE] tab blinks on the right above the copier touch panel screen.
Press [MACHINE] tab.
Mode Check screen appears on the control panel of copier.
7
Confirm the current settings.
– If you do not change any setting, proceed to the step 10.
8
If necessary, select the item and press the [ChangeSetting] to change settings.
9
Press the [OK].
The Mode Check screen will be restored.
10
Press [START] to resume the rest of the print job.
Smoothing
Prints the curved section of characters and images smoothly, when this printing system is used.
- [Type1] is suitable for printing the diagonal lines of normal characters and graphics.
- [Type2] is suitable for printing the curved sections of normal characters.
- [Type3] is suitable for printing the curved sections of ornamental writings and fine characters.
- When [Off] is selected, no smoothing operation is made.
bizhub PRO 950 (Version 2)
Smoothing
8
8-27