Executing Calibration Using The Image Controller - Konica Minolta bizhub PRESS C1100 Quick Manual

5.2 Image Quality Adjustment

Executing calibration using the image controller

This section describes how to carry out calibration for daily maintenance using Fiery Command WorkStation and a
colorimeter (EFI Spectrometer ES-1000).
Tips
This section describes how to carry out calibration when using coated paper as an example.
A
Use a USB cable to connect EFI Spectrometer ES-1000 to your computer.
For information about EFI Spectrometer ES-1000 setting and adjustment, refer to the manual supplied
with this machine.
B
Start Fiery Command WorkStation.
For information about how to start Fiery Command WorkStation, refer to page 3-15.
C
Click [Job Center] - [Calibrate] in
sequence.
Calibrator starts.
D
Select the printing preferences for
calibration.
-
Calibrate: Coated paper
- Paper source: Paper tray with coated paper
loaded
-
Measurement method: EFI ES-1000
NOTICE
This section describes how to specify a printing
environment when using coated paper as an example.
Specify a printing environment according to the paper
and tray actually used.
5-28