Konica Minolta bizhub pro 950 User Manual page 253

Utility Tool
Setting Up System V Release 4 and Solaris 2.X to Use lpd
If your system recognizes the LPSYSTEM command, you do not need to install the dedicated utility, Konica
Minolta's host-side software. Another option is the admintool if your system supports it.
LPSYSTEM Installation
The following procedure must be executed from the Bourne Shell.
Type: SH then press Enter to enter the Bourne Shell program.
Use the following procedures to install LPSYSTEM:
1
lpsystem -t bsd < Print server host name in /etc/hosts file >
2
lpadmin -p <local printername> -s <remote host name or IP address>
– !PRINT
– Your system may want its IP address instead of the remote host name.
3
Enable <local printername>
4
Accept <local printername>
5
Printing on Linux
bizhub PRO 950 (Version 2)
12
12-29