Page 1 User’s Guide Print Operations...
Page 3: Table Of Contents
Mac OS X (10.3/10.4/10.5)....................... 4-4 4.2.1 Installing the printer driver......................... 4-4 4.2.2 Selecting and connecting the printer (OS 10.4/10.5) ................ 4-4 4.2.3 Selecting and connecting the printer (OS 10.3) ................4-8 Test page print..........................4-11 bizhub PRO 950 (Version 2) Contents-1...
Page 4 Finish tab ............................7-35 7.14 Cover Mode tab ..........................7-40 7.15 Stamp/Composition tab ........................ 7-46 7.16 Quality tab ............................7-52 7.17 Other tab............................7-55 7.18 Favorite Setting..........................7-56 7.19 About View Area ..........................7-58 Contents-2 bizhub PRO 950 (Version 2)
Page 5 Start the PageScope Web Connection ................... 12-5 12.1.3 Print the report ..........................12-19 12.1.4 Make a direct print ........................12-20 12.2 NetWare............................12-21 12.3 UNIX Printing through TCP/IP....................12-24 12.4 ToneCurve Utility ......................... 12-30 bizhub PRO 950 (Version 2) Contents-3...
Page 6 Appendix 13.1 Setting the software switch ......................13-3 13.2 Procedure for installation with Linux................... 13-5 13.3 Glossary............................13-9 13.4 Software License List........................13-13 Index Contents-4 bizhub PRO 950 (Version 2)
Page 7: Introduction
Introduction...
Page 9: Bizhub Pro 950 (Version 2)
The bizhub PRO 950 is a copier equipped with a image controller function which allows you to print directly from a Windows compliant computer. And using a PostScript driver provided as an option also allows you to print from Macintosh.
Page 10: Trademarks And Copyright
Introduction Trademarks and copyright KONICA MINOLTA, KONICA MINOLTA logo, and the essentials of imaging are registered trademarks of KONICA MINOLTA HOLDINGS, INC.. bizhub, bizhub PRO and PageScope are trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.. SOFHA is a registered trademarks of SOFHA GmbH Corporation in the United States, in the Japan and in other countries.
Page 11: Bizhub Pro 950 (Version 2)
Note A part or all of this User's Guide may not be used or copied without permission. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. will have no liability for any influences caused by using the printing system and this User’s Guide. Information written in this User's Guide is subject to change without notice.
Page 12: Composition Of User's Guide
Please refer to this guide for how to use Plug-in driver in user mode. To operate safely, be sure to read "Section 2: Precautions for Installation and Use" in User’s Guide [Copier] before using the machine. bizhub PRO 950 (Version 2)
Page 13: About This Manual
Introduction About this manual This document describes how to operate bizhub PRO 950 as a printer from various computers and networks. This manual assumes you are familiar with the basic operation of your operating system and the KONICA MINOLTA copier.
Page 14: Notation Of Each Product
Above OSs Windows 2000/XP/Vista Windows 2000/XP/Vista/Server 2003/ Server 2008 Mac OS X Detail For Windows XP/Vista/Server 2003/Server 2008, the following are included; that is, Windows XP Professional, Windows Vista, Server 2003/Server 2008 that are 64bit OS. bizhub PRO 950 (Version 2)
Page 15: Explanation Of Manual Conventions
Text highlighted in this manner contains useful information and tips to ensure safe use of the machine. Reminder Text highlighted in this manner contains information that should be reminded. Detail Text highlighted in this manner contains references for more detailed information. bizhub PRO 950 (Version 2)
Page 16 The names of keys on the control panel are written as shown above. MACHINE SETTING Display texts are written as shown above. Note The machine illustrations shown in this manual can vary and depend on the machine configuration. 1-10 bizhub PRO 950 (Version 2)
Page 17: Software License Agreement
SOFTWARE LICENSE AGREEMENT SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form ("Font Programs"), other software which runs on a computer system for use in conjunction with the Printing Software ("Host Software"), and related...
Page 18 Introduction SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system ("Printing Software"), the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form ("Font Programs"), other software which runs on a computer system for use in conjunction with the Printing Software ("Host...
Page 19: Overview
Overview...
Page 21 Overview Overview The image controller feature enables the copier to connect to computers and networks to use as a printer. Copier bizhub PRO 950 (Version 2)
Page 22: Printer Driver
3-3 and "Installation of the printer driver (Macintosh)" on page 4-3 for more information about installation of printer driver. Refer to the "User’s Guide (PostScript3 Plug-in Driver)" for more information about Plug-in Driver. bizhub PRO 950 (Version 2)
Page 23: Composition Of A Product
Trimmer Unit option (TU-502) enables to select "Center Staple and Fold + Trim" function. Note Installing various options built in the copier properly on the printer driver allows you to use a variety of printing functions shared by the copier. bizhub PRO 950 (Version 2)
Page 24: Connections Of The Image Controller
Printing in which AppleTalk, Bonjour from Macintosh is used. (An optional PS expansion kit will be required.) IPP (Internet Printing Protocol) printing Printing in which Novell NetWare is used. 2.3.2 USB connection The USB interface can be connected to a computer. bizhub PRO 950 (Version 2)
Page 25: Product Specifications
Overview Product specifications Item Specifications Type Built-in box type for the KONICA MINOLTA Printer/Copier Resolution Printing System 600 x 600 dpi Scanning reso- 200 dpi / 300 dpi / 400 dpi / 600 dpi lution Gradation binary Printable Area Standard Margin 2.8 mm (left, right, top and bottom without variation)
Page 26: Restrictive Conditions
Although the Weekly Timer function of the main body printer is available in the Printer mode, the power is not turned off until the data output is finished when print data remains in the Image memory. Note Specifications are subject to change without notice. bizhub PRO 950 (Version 2)
Page 27: Installation Of The Printer Driver (Windows) (Manual Installation Using The Add Printer Wizard)
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
Page 29: Compliant Os
Windows XP/Server 2003 • "Windows XP/Server 2003" on page 3-11 Windows 2000 • "Windows 2000" on page 3-16 The Driver CD contains the PCL printer driver, and the PS Driver CD contains the PostScript PPD printer driver. bizhub PRO 950 (Version 2)
Page 30: Windows Vista/Server 2008
Select printer driver (PCL, PostScript PPD) to be used. Click [OK]. Printers list window appears. Click [Next]. Follow the on-screen instructions. – If the Windows Logo Testing or Digital Signature dialog box appears, click the [Continue] or [Yes]. bizhub PRO 950 (Version 2)
Page 31 The Install the printer driver dialog box appears. Click the [Have Disk]. Click the [Browse]. Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open]. – Select printer driver (PCL, PostScript PPD) to be used. bizhub PRO 950 (Version 2)
Page 32: Network Connection (Ipp Or Ipps)
<IP_address_of_machine>/ipp Example: If the IP address of the copier is 192.168.1.20, enter http://192.168.1.20/ipp. – When specifying to use IPP printing, enter "https:// <host name>.<domain name>/ipp". The window for confirming the user name and password may appear in the course of installation. bizhub PRO 950 (Version 2)
Page 33: Network Connection (Web Service Print)
Select the device name of the copier, and then click "Install" from the toolbar. The selected Web Service print-supporting printer is found, and then the Found New Hardware Wizard dialog box appears. Click [Locate and install driver software (recommended)]. A screen for confirming the search method appears. bizhub PRO 950 (Version 2)
Page 34 A printer is searched that is compatible with the Web service print of an IP address entered, and then a the Found New Hardware Wizard dialog box appears. Click [Locate and install driver software (recommended)]. bizhub PRO 950 (Version 2)
Page 35 Click the [Finish]. When the installation is completed, make sure that the icon of the installed printer appears in the Printers window. Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. bizhub PRO 950 (Version 2)
Page 36: Local Connection
Click the [Finish]. When the installation is completed, make sure that the icon of the installed printer appears in the Printers window. Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. 3-10 bizhub PRO 950 (Version 2)
Page 37: Windows Xp/Server 2003
For an LPR connection, select "LPR", and then enter "Print" in the "Queue name" box. – For a Port9100 connection, select "RAW", and then enter the RAW port number (9100 at default) in the "Port Number" box. – The information entered here is case-sensitive. Click the [Next]. bizhub PRO 950 (Version 2) 3-11...
Page 38: Network Connection (Smb)
The Add Printer Wizard starts. Click the [Next]. Select "Local printer attached to this computer", and then click the [Next]. – Clear the "Automatically detect and install my Plug and Play printer" check box. 3-12 bizhub PRO 950 (Version 2)
Page 39: Network Connection (Ipp Or Ipps)
"Printers and Other Hardware", and then click "Printers and Faxes". For Windows XP, click "Add a printer" on the "Printer Tasks" menu. – For Windows Server 2003, double-click the "Add Printer" icon. The Add Printer Wizard starts. Click the [Next]. bizhub PRO 950 (Version 2) 3-13...
Page 40 When the installation is completed, make sure that the icon of the installed printer appears in the Printers and Faxes window. Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. 3-14 bizhub PRO 950 (Version 2)
Page 41: Local Connection
When the installation is completed, make sure that the icon of the installed printer appears in the Printers and Faxes window. Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. bizhub PRO 950 (Version 2) 3-15...
Page 42: Windows 2000
– For an LPR connection, select "LPR", and then enter "Print" in the "Queue name" box. – The information entered here is case-sensitive. Click the [Next]. Click the [Finish]. The Add Printer Wizard appears. 3-16 bizhub PRO 950 (Version 2)
Page 43: Network Connection (Smb)
The Select a Printer Port dialog box appears. Click "Create a new port", and select "Standard TCP/IP Port" for "Type of port:". Click the [Next]. – The Add Standard TCP/IP Printer Port Wizard starts. bizhub PRO 950 (Version 2) 3-17...
Page 44: Network Connection (Ipp Or Ipps)
In the Local or Network Printer dialog box, select "Network printer", and then click the [Next]. In the Locate Your Printer dialog box, select "Connect to a printer on the Internet or on your intranet". 3-18 bizhub PRO 950 (Version 2)
Page 45 Click the [Finish]. When the installation is completed, make sure that the icon of the installed printer appears in the Printers window. Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. bizhub PRO 950 (Version 2) 3-19...
Page 46: Local Connection
Click the [Finish]. When the installation is completed, make sure that the icon of the installed printer appears in the Printers window. Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. 3-20 bizhub PRO 950 (Version 2)
Page 47: Test Page Print
7-3 for more information about [Properties] window. [KONICA MINOLTA 950 PCL Properties] dialog box appears. Select [General] tab in the [KONICA MINOLTA 950 PCL Properties] dialog box and click [Print Test Page]. The test page is printed and the confirmation window appears.
Page 48 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 3-22 bizhub PRO 950 (Version 2)
Page 49: Installation Of The Printer Driver (Macintosh)
Installation of the printer driver (Macintosh)
Page 51: Compliant Os
The printer driver is can be used on the following OS: Windows Printer Driver Mac OS X • "Mac OS X (10.3/10.4/10.5)" on page 4-4 The PS Driver CD contains the PostScript PPD printer driver. bizhub PRO 950 (Version 2)
Page 52: Mac Os X (10.3/10.4/10.5)
In OS 10.4, select "KONICA MINOLTA" in "Print Using", select the desired model from the list of models, and then click the [Add]. – In OS 10.5, entering [KONICA MINOLTA] in the text box for search allows you to find a driver with ease. bizhub PRO 950 (Version 2)
Page 53 [Add]. – In OS 10.5, entering [KONICA MINOLTA] in the text box for search allows you to find a driver with ease. When [Installable Options] is displayed, select an option that has been equipped to the copier and then click [Continue].
Page 54 [Add]. – In OS 10.5, entering [KONICA MINOLTA] in the text box for search allows you to find a driver with ease. When [Installable Options] is displayed, select an option that has been equipped to the copier and then click [Continue].
Page 55 [Add]. – In OS 10.5, entering [KONICA MINOLTA] in the text box for search allows you to find a driver with ease. When [Installable Options] is displayed, select an option that has been equipped to the copier and then click [Continue].
Page 56: Selecting And Connecting The Printer (Os 10.3)
When the Add Printer dialog box appears, click the [Add]. When the printer list appears, click the [Add]. Select [Rendezvous] as a connection method, and then select an intended printer name from among those detected. Select "KONICA MINOLTA" in "Printer Model", select the desired model from the list of models, and then click the [Add]. –...
Page 57 Click the [IP Printing]. Select "LPD/LPR" from "Printer Type". In "Address", enter the IP address of this machine. Select "KONICA MINOLTA" in "Printer Model", select the desired model from the list of models, and then click the [Add]. – If the selected printer is registered in the printer list, the setting procedure is completed.
Page 58 Click the [IP Printing]. Select "Internet Printing Protocol" from "Printer Type". In "Address", enter the IP address of this machine. Select "KONICA MINOLTA" in "Printer Model", select the desired model from the list of models, and then click the [Add]. –...
Page 59: Test Page Print
Installation of the printer driver (Macintosh) Test page print Macintosh Macintosh has no standard test print function. Double-click [ReadMe.txt] in the Driver CD. Then, select [Print...] from [File] menu and make sure it is printed properly. bizhub PRO 950 (Version 2) 4-11...
Page 60 Installation of the printer driver (Macintosh) 4-12 bizhub PRO 950 (Version 2)
Page 61: Uninstallation Of The Printer Driver
Uninstallation of the printer driver...
Page 63: Deletion Of Printer Driver By Manual Operation
For Windows Vista/Server 2008, when the deletion confirmation screen is additionally displayed, click the [Delete]. Close the opened screen and restart the computer. – Be sure to restart the computer. – This completes the printer driver uninstallation. bizhub PRO 950 (Version 2)
Page 64 When you check folders and find a folder of the applicable model, delete it. However, if multiple drivers are installed including the Konica Minolta driver and PostScript Konica Minolta driver, the model information of all drivers is deleted. If other drivers are remaining, do not delete it.
Page 65: Macintosh
Delete the unnecessary files from "Library" - "Printers". – Drag the "950" folder, which is located in "Library" - "Printers" - "KONICA MINOLTA", to the "Trash" icon. Drag the following file, which is located in "Library" - "Receipts", to the Trash icon.
Page 66 Uninstallation of the printer driver bizhub PRO 950 (Version 2)
Page 67: Basic Printing And Various Function
Basic printing and various function...
Page 69: Basic Printing Method
The [Print] dialog appears. Select printer in pull down menu besides the [Name]. Click [Preferences] to set detail if necessary. Click [OK] if a required setup is finished. The display returns to the [Print] dialog. bizhub PRO 950 (Version 2)
Page 70 – Refer to "PostScript PPD printer driver setting (Mac OS X)" on page 9-3 for more information about print setup. Click [Print]. The image controller receives and processes a print job sent from your computer. bizhub PRO 950 (Version 2)
Page 71: Various Function
You can make a print with a color paper by specifying a desired color paper from the printer driver. Operating System Printer Driver Refer to Windows KONICA MINOLTA PCL "Basic tab" on page 7-15 PostScript PPD "Advanced Options windows" on page 8-18 Mac OS X PostScript PPD "Setup (Print window)" on page 9-12 bizhub PRO 950 (Version 2)
Page 72 Document Reduction To set the margins You can set the margins of output paper. Operating System Printer Driver Refer to Mac OS X PostScript PPD "Custom Paper Size (Page Setup window)" on page 9-8 Margin bizhub PRO 950 (Version 2)
Page 73: To Set The Paper Tray
Printer Driver Refer to Windows KONICA MINOLTA PCL "Basic tab" on page 7-15 PostScript PPD "Device Settings tab" on page 8-12 Mac OS X PostScript PPD "Paper Feed (Print window)" on page 9-11 Paper feed tray bizhub PRO 950 (Version 2)
Page 74 "Finish tab" on page 7-35 PostScript PPD "Advanced Options windows" on page 8-18 Mac OS X PostScript PPD "Finishing (Print window)" on page 9-18 Output tray Note The position of the output tray varies depending on the optional unit. bizhub PRO 950 (Version 2)
Page 75: To Print Multiple Copies
Printer Driver Refer to Windows KONICA MINOLTA PCL "Finish tab" on page 7-35 PostScript PPD "Advanced Options windows" on page 8-18 Mac OS X PostScript PPD "Finishing (Print window)" on page 9-18 Sub copier Master copier bizhub PRO 950 (Version 2)
Page 76 Printer Driver Refer to Windows KONICA MINOLTA PCL "Basic tab" on page 7-15 PostScript PPD "Advanced Options windows" on page 8-18 Mac OS X PostScript PPD "Finishing (Print window)" on page 9-18 Offset Copies 6-10 bizhub PRO 950 (Version 2)
Page 77: To Print Multiple
"Layout tab" on page 7-27 PostScript PPD "Layout tab" on page 8-15 Mac OS X PostScript PPD "Layout (Print window)" on page 9-10 2 in 1 4 in 1 6 in 1 9 in 1 16 in 1 bizhub PRO 950 (Version 2) 6-11...
Page 78 Prints a specific page so that it comes on the front, especially when printing on both sides of the paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA PCL "Layout tab" on page 7-27 1'st page of a chapter 6-12 bizhub PRO 950 (Version 2)
Page 79 Face down Face up Not to print blank page Selects not to print out blank pages in the document. Operating System Printer Driver Refer to Windows KONICA MINOLTA PCL "Layout tab" on page 7-27 bizhub PRO 950 (Version 2) 6-13...
Page 80: To Set The Front/Back Cover, Insertion Sheet And Cover Sheet
Sets to insert a blank or printer paper which uses a different paper from that for the body pages. Operating System Printer Driver Refer to Windows KONICA MINOLTA PCL "Cover Mode tab" on page 7-40 Insertion Insertion sheet - Blank sheet - Printed 6-14 bizhub PRO 950 (Version 2)
Page 81 To set a tab paper Sets to print tab paper. You can set the text, tab position, and number of tabs. Operating System Printer Driver Refer to Windows KONICA MINOLTA PCL "Cover Mode tab" on page 7-40 bizhub PRO 950 (Version 2) 6-15...
Page 82: To Set For Finishing
KONICA MINOLTA PCL "Configure tab" on page 7-11 PostScript PPD "Device Settings tab" on page 8-12 Mac OS X PostScript PPD "The method to open the [Printer Info] window (v10.4/v10.5)" on page 9-3 Punch Unit 6-16 bizhub PRO 950 (Version 2)
Page 83 Operating System Printer Driver Refer to Windows KONICA MINOLTA PCL "Finish tab" on page 7-35 PostScript PPD "Advanced Options windows" on page 8-18 Mac OS X PostScript PPD "Finishing (Print window)" on page 9-18 bizhub PRO 950 (Version 2) 6-17...
Page 84: To Set A Watermark
"Stamp/Composition tab" on page 7-46 To create a new watermark Creates a new Watermark printed on the output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA PCL "Stamp/Composition tab" on page 7-46 6-18 bizhub PRO 950 (Version 2)
Page 85 KONICA MINOLTA PCL "Stamp/Composition tab" on page 7-46 To set numbering Prints the copy number to the printed page. Operating System Printer Driver Refer to Windows KONICA MINOLTA PCL "Stamp/Composition tab" on page 7-46 bizhub PRO 950 (Version 2) 6-19...
Page 86: To Set An Image And Shade
Refer to Windows KONICA MINOLTA PCL "Quality tab" on page 7-52 PostScript PPD "Advanced Options windows" on page 8-18 Mac OS X PostScript PPD "Image/Layout (Print window)" on page 9-15 Normal Toner Save Draft 6-20 bizhub PRO 950 (Version 2)
Page 87: To Set Font-Related Items
To set the format of the font that is to be downloaded (download font format) Selects the font format to be downloaded to the printer (Outline or BMP). Operating System Printer Driver Refer to Windows KONICA MINOLTA PCL "Quality tab" on page 7-52 bizhub PRO 950 (Version 2) 6-21...
Page 88: Checking The Printer Driver Setting
Protects a print job with a password when printing a confidential document. Operating System Printer Driver Refer to Windows KONICA MINOLTA PCL "Basic tab" on page 7-15 Mac OS X PostScript PPD "Security (Print window)" on page 9-23 6-22 bizhub PRO 950 (Version 2)
Page 89: Pcl Printer Driver Setting (Windows)
PCL printer driver setting (Windows)
Page 91: About Properties Window
Note This chapter is described by using the printer window of Windows Vista. The properties window may differ from the window displayed by the printing command of applications. bizhub PRO 950 (Version 2)
Page 92: About Button
Help When the [Help] is clicked, Help information appears. As well, when you click [Help] which ap- pears when right-clicking a desired item, pop-up help for the item appears. bizhub PRO 950 (Version 2)
Page 93: Combination Of The Function
When you select a function which causes a confliction with the settings already configured, the message will be displayed This is a confirmation message to decide which setting will be turned off. When this message is displayed, click [OK]. bizhub PRO 950 (Version 2)
Page 94: General Tab
Displays the property window of the selected printer. You can change the setting of the printer driver with the property window. Print test page Prints a test page of Windows. You can print a test page without using any application. Note For more information, refer to the manual of the Windows. bizhub PRO 950 (Version 2)
Page 95: Sharing Tab
The method to open the Properties window depends on OS. Refer to "About properties window" on page 7-3 about how to open the Property window. By using this [Sharing] tab, you can make the printer available to network users. Note For more information, refer to the manual of the Windows. bizhub PRO 950 (Version 2)
Page 96: Ports Tab
Using this button enables you to configure the selected port from above list. Enable printer pooling Enables printing to two or more identical print devices by using one logical printer. Note For more information, refer to the manual of the Windows. bizhub PRO 950 (Version 2)
Page 97: Advanced Tab
Sets to print the spooled document irrespective of a priority settings. Keep printed documents Sets to hold the spooled data of the documents after printing. Enable advanced printing features Enables the advanced printing features. Note For more information, refer to the manual of the Windows. bizhub PRO 950 (Version 2)
Page 98: Security Tab
The method to open the Properties window depends on OS. Refer to "About properties window" on page 7-3 about how to open the Property window. For more information, refer to the manual of the Windows. 7-10 bizhub PRO 950 (Version 2)
Page 99: Configure Tab
Be sure to select the options from the "Device Option". Paper Type settings Indicates the paper type specified for each tray. Click the [Paper Tray Settings] button to specify the settings for each paper tray. bizhub PRO 950 (Version 2) 7-11...
Page 100 The [Acquire Device Information] function cannot be used unless you are connected and able to communicate with the copier. Acquire settings Specifies the conditions of the connection destination to execute Acquire Device Information. Software tools Starts up software tools such as PageScope Web Connection. 7-12 bizhub PRO 950 (Version 2)
Page 101: Settings Tab
Turn on the checkbox when the output method of Basic tab is fixed to the Secure Print. Popup the user settings dialog at secure print Displays the User Settings dialog box when a secure print is specified. bizhub PRO 950 (Version 2) 7-13...
Page 102 PCL printer driver setting (Windows) Save Custom Size Saves the custom paper sizes. Acquire Device Information Communicate with the copier to read the Custom size that has been registered and display it in the list. 7-14 bizhub PRO 950 (Version 2)
Page 103: Basic Tab
The method to open the Printing Preference window depends on OS. Refer to "About properties window" on page 7-3 about how to open the Printing Preference window. Paper - Orientation Sets the orientation to output paper in [Portrait] or [Landscape]. The default is [Portrait]. bizhub PRO 950 (Version 2) 7-15...
Page 104 8 1/2 x 11 W 5 1/2 x 8 1/2 W A4 Tab 8 1/2 x 11 Tab Custom Size Note When [Custom Size] is selected, it is possible to set and register the original size. 7-16 bizhub PRO 950 (Version 2)
Page 105 ISO-B5 W 11 x 17 W 8 1/2 x 11 W 5 1/2 x 8 1/2 W A4 Tab 8 1/2 x 11 Tab Custom Size The default is the Same as original size. bizhub PRO 950 (Version 2) 7-17...
Page 106 8 1/2 e 11W/5 1/2 e 8 1/2W/A4 Tab/8 1/2 e 11 Tab/Custom Size Paper Type (Paper Name) Make a selection to decide if complying with the Default Setting or using the name registered in the information of the Paper Name. 7-18 bizhub PRO 950 (Version 2)
Page 107 This is set when printing the user specified paper set on the copier. Embossed This is set when printing the embossed paper. Blank Insert This is set when printing blank paper such as cover sheet. bizhub PRO 950 (Version 2) 7-19...
Page 108 Update Paper Name - Acquire Device Information Communicate with the copier to read the information of the Paper Name that has been registered and display it in the list. Output Method - Print Sets the normal printing. 7-20 bizhub PRO 950 (Version 2)
Page 109 Click [Preferences] to open the [Printing Preferences] window. Select [Secure Print] in the [Output Method]. [Secure Print Settings] window appears. Enter [Secure Print ID] and [Password]. – Secure Print ID: Enter the confidential box name. – Password: Enter the password. bizhub PRO 950 (Version 2) 7-21...
Page 110 Select [Auto] and press the [OK]. Confidential file is printed. Detail To confirm the settings for Confidential Output, select [Wait] or [Proof], and press [OK]. For more information, refer to "User’s Guide (Network Scanner)". 7-22 bizhub PRO 950 (Version 2)
Page 111 The print jobs will be saved in the built-in hard disc (HDD-A) of the copier. Detail For details of the method for outputting the print jobs saved (Output from the HDD-A), refer to the User’s Guide (Network Scanner). bizhub PRO 950 (Version 2) 7-23...
Page 112 If you do not change any setting, proceed to the step 10. If necessary, select the item and press the [ChangeSatting] to change settings. Press the [OK]. The Mode Check screen will be restored. Press [START] to resume the rest of the print job. 7-24 bizhub PRO 950 (Version 2)
Page 113 File Name: Enter a file name when a file is saved in the box. User Box Number: Enter a box number of a box into which a job is saved. Authentication/Account Track Sets the User Authentication mode/Account Track. Detail Contact your administrator about User Authentication/Account Track. bizhub PRO 950 (Version 2) 7-25...
Page 114 Offset Only when the finisher unit has been setup, select to shift the next position of each set of print out back and forth when printing multi set of copies. 7-26 bizhub PRO 950 (Version 2)
Page 115: Layout Tab
1" and enraged for "N x N" against the document. 2 in 1 4 in 1 6 in 1 9 in 1 16 in 1 2 x 2 3 x 3 4 x 4 bizhub PRO 950 (Version 2) 7-27...
Page 116 Selects the number of pages to be printed onto a single sheet. Layout Order Selects the printing order of pages. Border Selects whether draw a frame or line as the border between pages. Overlap width line Selecting "N x N" sets "Overlap width line". 7-28 bizhub PRO 950 (Version 2)
Page 117 Blank pages might be printed out even if this is set, depending on the data in the document. The [Skip Blank Page] cannot be set in the following cases: [Combination] is available in [Layout] tab. bizhub PRO 950 (Version 2) 7-29...
Page 118 This is the front side A specified page The [Chapter] cannot be set in the following cases: The [1-Sided] is selected in the [Layout] tab - [Print Type]. When the [Fold] check box is ON in [Finish] tab. 7-30 bizhub PRO 950 (Version 2)
Page 119 When an item other than [2-Sided] is selected in the [Layout] tab - [Print Type]. Binding Position Sets the binding position for the document to be printed. The position selected here will be the position of stapling, punching and base position of the image shift. bizhub PRO 950 (Version 2) 7-31...
Page 120 Adjusts the details of the printing position to the output paper. Example: When the settings are shifted to the right by 100 and down by 300. (Unit: 0,1 mm) Shifted down by 30 mm Shifted to the right by 10 mm 7-32 bizhub PRO 950 (Version 2)
Page 121 7-41, the relevant page is shifted to the right by the specified shift amount. However, since there is no function provided to specify the position of the tab, it is necessary to set up in advance the correct print information at the tab position. bizhub PRO 950 (Version 2) 7-33...
Page 122 (When this function is turned on, the setting of [Image Shift] is applicable only to those other than the Tab Paper.) The movement of 10 -15 mm to the right is available. Moving allows printing on the Tab section. 7-34 bizhub PRO 950 (Version 2)
Page 123: Finish Tab
Configures the special functions of the image controller. Detail The method to open the Printing Preference window depends on OS. Refer to "About properties window" on page 7-3 about how to open the Printing Preference window. bizhub PRO 950 (Version 2) 7-35...
Page 124 Center Staple and Fold Staples at the center of the output paper and folds it into half. The [Center Staple and Fold] cannot be set in the following cases: When [FS-611] is not available in [Configure] tab. 7-36 bizhub PRO 950 (Version 2)
Page 125 The [Punch] cannot be set in the following cases: When [Punch Unit], [Punch Z-Fold Unit] or [Stream Punch] is not available in [Configure] tab. When [Booklet] is selected in [Setup] tab - [Print Type]. bizhub PRO 950 (Version 2) 7-37...
Page 126 [Face Up] outputs paper with the printed side facing up. "(1 to N)" means to output paper starting with the first page. "(N to 1)" means to output paper starting with the last page. 7-38 bizhub PRO 950 (Version 2)
Page 127 Refer to the "User’s Guide (POD Administrator’s Reference)" for more information about Tandem Mode. Sub copier Master copier Tandem Mode cannot be set in the following cases: When [Transparency Interleave] is selected. When [Enhanced Security] is set to ON. bizhub PRO 950 (Version 2) 7-39...
Page 128: Cover Mode Tab
Specifies the paper tray for the front cover. Paper Type (Paper Name) Make a selection to decide if complying with the Default Setting or using the name registered in the information of the Paper Name. 7-40 bizhub PRO 950 (Version 2)
Page 129 Selects the list name from the list. Per Page Setting - Edit List Edits Per Page Setting. When select the Per Page Setting from the list and click this button, the [Per Page Setting] dialog mentioned above appears. bizhub PRO 950 (Version 2) 7-41...
Page 130 When click this button, the [Edit List Name] dialog appears. Per Page Setting - Staple Settings Sets to use staple in the Per Page Settings. When click this button, the [Staple Settings] dialog appears. 7-42 bizhub PRO 950 (Version 2)
Page 131 Tab Text Set the orientation and position of the tab text. Font Settings Set the font, font style and size of the tab text. bizhub PRO 950 (Version 2) 7-43...
Page 132 And also, the continuous insertion of up to 20 sheets is available for each of the Font cover/Back cover. The [Back Cover from Post Inserter] cannot be set in the following cases: When the [Cover Sheet Feeder] is not selected in the [Configure] tab. 7-44 bizhub PRO 950 (Version 2)
Page 133 This is set when inserting the printed interleaf for the transparent sheet. Interleave Tray Uses to select the paper tray for Transparency Interleave. Note You can select when Transparency is set for Bypass Tray. bizhub PRO 950 (Version 2) 7-45...
Page 134: Stamp/Composition Tab
Input the watermark name in the [Watermark Name] and the new watermark text in the [Watermark Text], new watermark text appears in the [Current Watermark]. Delete Clicks this to delete the current watermark. Watermark Name Enter the Watermark Name. 7-46 bizhub PRO 950 (Version 2)
Page 135 Controls the "lean" angle of the watermark by clicking the [,] or by typing a number in the text value box from -90 degrees to 90 degrees. Sharing The settings of the watermark are shared with other computers. bizhub PRO 950 (Version 2) 7-47...
Page 136 The [Printing Preferences] window closes. Click [Print]. Specify a location into which an overlay file is saved. Input the file name in the [File Name]. and click [Save]. – Use ".KFO" as the extension. 7-48 bizhub PRO 950 (Version 2)
Page 137 Click [Print]. – Turn the [Print in Overlay] check box to OFF after printing has been completed. Along with the overlay data the document to be printed is printed on top of the overlay data. bizhub PRO 950 (Version 2) 7-49...
Page 138 Page number is printed except front/back cover. Page Number - Starting Page Specifies the first page to print the page numbers. Page Number - Starting Page Number Specifies the initial page number to print. 7-50 bizhub PRO 950 (Version 2)
Page 139 Distribution Number Stamping - Pages to Print Specifies the pages to print the copy number. You can choose either from [All Pages] or [1st Page Only]. Distribution Number Stamping - Starting Number Specifies the initial copy number to print. bizhub PRO 950 (Version 2) 7-51...
Page 140: Quality Tab
[Type 3] is suitable for printing the curved sections of ornamental writings and fine characters. When check box is OFF, no smoothing operation is made. Toner Save Saves the consumption of toner by controlling printing density. Draft Print Prints lightly, which is suitable for draft documents. 7-52 bizhub PRO 950 (Version 2)
Page 141 Checking on the [Text and Graphics] allows you to print colored characters and lines, and graphics clearly in black. Print with Black - All Checking on the [All] allows you to print all objects including image data such as picture image excepting white areas clearly in black. bizhub PRO 950 (Version 2) 7-53...
Page 142 Displays the substitution settings of the True Type Font which is substituted with the built-in printer fonts. Use Printer Font - Font Substitution Settings Selects the printer fonts which substitutes for the highlighted True Type Font. 7-54 bizhub PRO 950 (Version 2)
Page 143: Other Tab
"Remove White Background" and "Thin Line Support" function are only for the PCL driver. Thin Line Support Print the extra-fine lines of the document. Check Driver Version Displays the version of the current printer driver. bizhub PRO 950 (Version 2) 7-55...
Page 144: Favorite Setting
Setting is saved and the name entered is displayed on the Favorite Setting list. To restore the setting in storage Setting in storage can be restored when required. Click [Favorite Setting] menu. Select the setting to be restored from the list. 7-56 bizhub PRO 950 (Version 2)
Page 145 [Save] (extension: KFS). To delete the setting file Setting file can be deleted by the following method: Click [Edit] of the Favorite Setting. Select the file to delete from the list, click [Delete]. Click [Yes]. bizhub PRO 950 (Version 2) 7-57...
Page 146: About View Area
Setting of the printer driver and status of the optional unit can be checked. To check the status of the optional unit Status of the optional unit can be checked by the image. Click [Printer View]. 7-58 bizhub PRO 950 (Version 2)
Page 147 Paper Sources • Output Tray Icon view • Cover/Front Cover Page/Back Cover Page/ Per Page Setting • Watermark • Secure Print • Image Shift Detail Refer to the HELP for more information about Icon view. bizhub PRO 950 (Version 2) 7-59...
Page 148 PCL printer driver setting (Windows) 7-60 bizhub PRO 950 (Version 2)
Page 149 PostScript PPD printer driver setting (Windows)
Page 151 Note This chapter is described by using the printer window of Windows Vista. The properties window may differ from the window displayed by the printing command of applications. bizhub PRO 950 (Version 2)
Page 152 When the [Apply] is clicked, the present tab settings are saved. This button is useful when you want conduct other settings in other tabs, and the present tab settings are registered before using other tabs. bizhub PRO 950 (Version 2)
Page 153 This is a confirmation message to decide whether to restore the previous settings or keep the settings. When this message is displayed, select [Resolve all conflicts for me automatically] or [I will resolve the conflict myself]. When selecting [Resolve all conflicts for me automatically], the previous setting will be turned OFF. bizhub PRO 950 (Version 2)
Page 154 Displays the property window of the selected printer. You can change the setting of the printer driver with the property window. Print Test Page Prints a test page of Windows. You can print a test page without using any application. Note For more information, refer to the manual of the Windows. bizhub PRO 950 (Version 2)
Page 155 The method to open the Properties window depends on OS. Refer to "About properties window" on page 8-3 about how to open the Property window. By using this [Sharing] tab, you can make the printer available to network users. Note For more information, refer to the manual of the Windows. bizhub PRO 950 (Version 2)
Page 156 Gets the status information from the print device. Enable printer pooling Enables printing to two or more identical print devices by using one logical printer. Note For more information, refer to the manual of the Windows. bizhub PRO 950 (Version 2)
Page 157 Sets to print without spooling. Hold mismatched documents Sets to hold the document which does not match to the printer setup. Print spooled documents first Sets to print the spooled document irrespective of a priority settings. bizhub PRO 950 (Version 2)
Page 158 Keep printed documents Sets to hold the spooled data of the documents after printing. Enable advanced printing features Enables the advanced printing features. Note For more information, refer to the manual of the Windows. 8-10 bizhub PRO 950 (Version 2)
Page 159 The method to open the Properties window depends on OS. Refer to "About properties window" on page 8-3 about how to open the Property window. Note For more information about Security tab, refer to the manual of the Windows. bizhub PRO 950 (Version 2) 8-11...
Page 160: Device Settings Tab
Performs settings of PostScript and the options of the printer. Detail The method to open the Properties window depends on OS. Refer to "About properties window" on page 8-3 about how to open the Property window. 8-12 bizhub PRO 950 (Version 2)
Page 161 Font Substitution Table Selects to substitute with printer fonts for the True Type Font or "Don’t Substitute". Available PostScript Memory Displays the available PostScript memory. For more information, refer to the Adobe PS User’s Guide. bizhub PRO 950 (Version 2) 8-13...
Page 162 In this printing system, the following options are installable. Item Available settings Paper Source Unit None/LU-407/LU-408 Finisher None / FS-528/FS-611 Cover Sheet Feeder None/PI-506 Punch Z-Fold Unit None/PK-503/PK-504/PK-505(2/3 Hole)/PK-505(2/4 Hole)/ZU-607(2-Hole)/ ZU-607(2/3 Hole)/ZU-607(2/4Hole) Trimmer None/TU-502 Multi Hole Punch Unit None/GP-501 8-14 bizhub PRO 950 (Version 2)
Page 163: Layout Tab
Sets the orientation to output paper in [Portrait], [Landscape] or [Rotated Landscape]. Page Order Selects the output order. [Front to Back] outputs paper starting with the first page. [Back to Front] outputs paper starting with the last page. bizhub PRO 950 (Version 2) 8-15...
Page 164 2 in 1 4 in 1 6 in 1 9 in 1 16 in 1 Advanced Opens the [KONICA MINOLTA 950 PS(P) Advanced Options] window. For more information, refer to "Advanced Options windows" on page 8-18. 8-16 bizhub PRO 950 (Version 2)
Page 165: Paper/Quality Tab
User This is set when printing the user specified paper set on the copier. Advanced Opens the [KONICA MINOLTA 950 PS(P) Advanced Options] window. For more information, refer to "Advanced Options windows" on page 8-18. bizhub PRO 950 (Version 2)
Page 166: Advanced Options Windows
Performs advanced settings of the printer. Detail The method to open the Printing Preference window depends on OS. Refer to "About properties window" on page 8-3 about how to open the Printing Preference window. 8-18 bizhub PRO 950 (Version 2)
Page 167 Tabloid Wide Note The paper with "Wide" at the end of the document size represents "Wide paper". Graphic - Scaling Prints by specifying the enlargement or reduction ratio in the range from 1% to 1000%. bizhub PRO 950 (Version 2) 8-19...
Page 168 The [Output Tray] cannot be set in the following cases: Available option which is not selected in the [Device Settings] tab. When [Staple] is available, any item other than [Default] and [Main Tray] can not be set. 8-20 bizhub PRO 950 (Version 2)
Page 169 Prints a document of 2 pages onto a single paper twice as big as a paper selected in the output paper. Example: 2 A4 size papers are aggregated on 1 A3 size paper. 2 in 1 Booklet 2 Repeat 2 Repeat Reversal (L) 2 Repeat Reversal (R) bizhub PRO 950 (Version 2) 8-21...
Page 170 When the [Finisher] is not available in the [Device Settings] tab - [Installable Options] When the [Default] or [Main Tray] is not selected in the [Output Tray]. When any item other than [Z-fold] is selected in the [Fold]. 8-22 bizhub PRO 950 (Version 2)
Page 171 When the [Punch Z-Fold Unit] or [Multi Hole Punch Unit] (When the multi holes punch function is used) is not available in the [Device Settings] tab - [Installable Options] When the other than [Z-fold] is selected in the [Fold]. bizhub PRO 950 (Version 2) 8-23...
Page 172 Adjusts the details of the printing position to the output paper. Example: When the settings are shifted to the right by 100 and down by 300. (Unit: 0,1 mm) Shifted down by 30 mm Shifted to the right by 10 mm 8-24 bizhub PRO 950 (Version 2)
Page 173 The [Back Cover Page] cannot be set in the following cases: When any item other than [Off] or [Z-Fold] is selected for the [Fold]. Back Cover Tray Specifies the paper tray for the back cover. bizhub PRO 950 (Version 2) 8-25...
Page 174 Select [Wait Mode] to wait before printing the document to check the current setting from the control panel of copier. – Select [Proof and Print] to print the one copy as a test to check the output and the current setting from the control panel of copier. 8-26 bizhub PRO 950 (Version 2)
Page 175 [Type2] is suitable for printing the curved sections of normal characters. [Type3] is suitable for printing the curved sections of ornamental writings and fine characters. When [Off] is selected, no smoothing operation is made. bizhub PRO 950 (Version 2) 8-27...
Page 176 A rule of thumb is used for the value of print density. Date/Time Specify the pages to print the date and time. Item Function All pages Date/Time is printed in the all pages. 1st Page Only Date/Time is printed in the 1st only. 8-28 bizhub PRO 950 (Version 2)
Page 177 Tandem printing should only be set up by your authorized service representative. Refer to the "User’s Guide (POD Administrator’s Reference)" for more information about Tandem Mode. Sub copier Master copier Tandem Mode cannot be set in the following cases: When [Transparency Interleave] is selected. bizhub PRO 950 (Version 2) 8-29...
Page 178 PostScript PPD printer driver setting (Windows) 8-30 bizhub PRO 950 (Version 2)
Page 179: Postscript Ppd Printer Driver Setting (Mac Os X)
PostScript PPD printer driver setting (Mac OS X)
Page 181: About Mac Os X Window
The method to open the [Printer Info] window (v10.4/v10.5) On the "Apple" menu, select "System Preferences". Select [Print & Fax]. Select the printer and click [Options & Supplies] ([Printer Setup]). Select [Driver] ([Installable Options]). – [Printer Info] window appears. bizhub PRO 950 (Version 2)
Page 182 Cover Sheet Feeder Selects an installed Cover Sheet Feeder. Punch Z-Fold Unit Selects an installed Punch Z-Fold Unit. Trimmer Selects an installed Trimmer Unit. Multi Hole Punch Unit Selects an installed Multi Hole Punch Unit. bizhub PRO 950 (Version 2)
Page 183 Select [Print] from File menu. – The [Print] window appears. Detail To perform printing, click [Print]. Selecting [Save As] on the [Presets] pop-up menu enables you to save the settings you configured in the [Print] window. bizhub PRO 950 (Version 2)
Page 184: Page Attributes (Page Setup Window)
Selects [Page Attributes] on the [Settings] pop-up menu in the [Page Setup] window. Detail Refer to the "The method to open the [Page Setup] window" on page 9-5. Format for Selects the printer you want to use. bizhub PRO 950 (Version 2)
Page 185 Prints by specifying the enlargement or reduction ratio in the range from 25% to 400%. The [Scale] cannot be set in the following cases: When the [Pages per Sheet] is set to any item other than [1]. bizhub PRO 950 (Version 2)
Page 186: Custom Paper Size (Page Setup Window)
You can register a new Custom Paper Size. In case of OS v10.4/v10.5, click [+] to create the custom page size. Paper Size Sets the height and width of the output paper. Printer Margins Sets the margins of the output paper. bizhub PRO 950 (Version 2)
Page 187: Copies & Pages (Print Window)
Prints all pages of the document. From [ ] To [ ] Enters the initial page number and the ending page number. If you want to print one page, enter the page number to the both boxes. bizhub PRO 950 (Version 2)
Page 188: Layout (Print Window)
6 in 1 9 in 1 16 in 1 Layout Direction Selects the layout direction the pages allocated onto a single paper. Border Selects whether draw a frame or line as the border between pages. 9-10 bizhub PRO 950 (Version 2)
Page 189: Paper Feed (Print Window)
Prints the first page from the specified tray in upper box and remaining pages from the specified tray in lower box. Detail If you use [Auto Select], a paper feed tray is automatically selected. The paper specified in [Page Attributes] of this printing system is set on the tray. bizhub PRO 950 (Version 2) 9-11...
Page 190: Setup (Print Window)
When [Paper Source] is not available in the [Printer Info] dialog box. Paper Color Selects the colors of paper as the output paper as shown below. No Setting White Clear Yellow Pink Blue Green 9-12 bizhub PRO 950 (Version 2)
Page 191 The [Back Cover] cannot be set in the following cases: When the [Collated] is not available in the [Print] - [Copies & Pages] When the [Pages per Sheets] is selected in the [Print] - [Layout] bizhub PRO 950 (Version 2) 9-13...
Page 192 Interleave Tray Sets this when you want to use the paper feed tray for [Transparency Interleave]. [Interleave Tray] cannot be set in the following cases: [Transparency Interleave] is not set in the [Setup] window. 9-14 bizhub PRO 950 (Version 2)
Page 193: Image/Layout (Print Window)
The [2in1] and [2 repeat] cannot be set in the following cases: When any item other than [Off] is selected for [Front Cover], [Back Cover], [PI Front Cove Tray] or [PI Back Cover Tray] in the [Print] - [Setup]. bizhub PRO 950 (Version 2) 9-15...
Page 194 Displays the resolution of the printer (600 dpi). Print Density Selects the printing density. Item Print density Normal 100% 102% Toner Save Draft Print Note A rule of thumb is used for the value of print density. 9-16 bizhub PRO 950 (Version 2)
Page 195 [Type 2] is suitable for printing the curved sections of normal characters. [Type 3] is suitable for printing the curved sections of ornamental writings and fine characters. When [Off] is selected, no smoothing operation is made. bizhub PRO 950 (Version 2) 9-17...
Page 196: Finishing (Print Window)
Selects to shift the exit position of each set of print out back and forth when printing multi set of copies. The [Offset] cannot be set in the following cases: When the [Japanese Post Card], or [Custom] is selected for [Page Setup] - [Paper Size]. When the Finisher is not available. 9-18 bizhub PRO 950 (Version 2)
Page 197 The [N to 1] outputs paper starting with the last page. Binding Position Sets the binding position for the document to be printed. The position selected here will be the position of stapling, punching and base position of the image shift. bizhub PRO 950 (Version 2) 9-19...
Page 198 (Portrait) (Portrait) The [Staple] cannot be set in the following cases: When the [Finisher] is not available in the [Printer Info] - [Installable Options]. When any item other than [Z-Fold] is selected for [Fold]. 9-20 bizhub PRO 950 (Version 2)
Page 199 [Device Settings] tab - [Installable Options] When the [Post Card], [Wide paper (W)] or [Custom] is selected for [Page Setup] - [Paper Size]. When any item other than [Z-Fold] is selected for [Fold]. bizhub PRO 950 (Version 2) 9-21...
Page 200 When any item other than [Off] is selected for the [Front Cover], [Back Cover], [PI Front Cover Tray] and [PI Back Cover Tray]. The setting of [Fold] is available when the following unit is installed. Item Punch Z-Fold Unit Finisher (FS-611) Z-Fold Multi-Letter Fold (In/Out) Multi-Half Fold 9-22 bizhub PRO 950 (Version 2)
Page 201: Security (Print Window)
Enter [Secure Print ID] and [Password]. – Secure Print ID: Enter the confidential box name. – Password: Enter the password. Click [Print] to perform printing from the application. Press [RECALL] on the touch panel of copier. bizhub PRO 950 (Version 2) 9-23...
Page 202 The [Save in User Box Settings] field becomes active. Enter [File Name] and [User Box Number] and click [Print] to perform printing from the application. The print jobs will be saved in the built-in hard disc (HDD-A) of the copier. 9-24 bizhub PRO 950 (Version 2)
Page 203 The Mode Check screen will be restored. Press [START] to resume the rest of the print job. User Authentication/Account Track Sets the User Authentication mode/Account Track mode. Detail Contact your administrator about User Authentication/Account Track. bizhub PRO 950 (Version 2) 9-25...
Page 204 User Authentication/Account Track (page 9-25) To print using these functions, you should enter the password on the control panel of the copier after transmitting the print data. Refer to "User’s Guide (Security)" for more information. 9-26 bizhub PRO 950 (Version 2)
Page 205: Troubleshooting
Troubleshooting...
Page 207: Basic Troubleshooting
Basic troubleshooting This section describes how to troubleshoot. If problems are not resolved by using the following procedure, contact your Konica Minolta service representative. First check the following ordinary causes of abnormalities Check the power of the main body printer (copier), computers and cable connections.
Page 208: General Problems Of Printing
Turn off the copier and wait for 10 seconds, then restart it. Print the test print again after the image controller is ready. – Contact your Konica Minolta service representative if you cannot print the test page after performing the above procedures. The print setting of a job does not correspond to the result of printing Check that the printer setting was not changed.
Page 209 Check that any item other than [Custom Size] or [Japanese Post Card] is selected in [Output Tray] Check that [Plain Paper] is selected in the [Paper Type]. In the case of the PCL printer driver, check that the [Print type] setting is not [Booklet]. bizhub PRO 950 (Version 2) 10-5...
Page 210: General Problems Of Postscript
The direction in which non fixed size paper is loaded in the copier may be in- printed correctly (Macintosh). correct. Rotate the paper direction 90 degrees and then try printing after changing the settings of the driver and copier accordingly. 10-6 bizhub PRO 950 (Version 2)
Page 211: Checking On Incomplete Jobs
To get the non complete job list screen to appear Press [JOB LIST] on the LCD panel. Press [Incomplete]. Check the Incomplete job. Detail For more information about job list, consult your system administrator. bizhub PRO 950 (Version 2) 10-7...
Page 212 Troubleshooting 10-8 bizhub PRO 950 (Version 2)
Page 213: Font
Font...
Page 215: Font List (Pcl)
Font Font This chapter describes the font. 11.1 Font list (PCL) bizhub PRO 950 (Version 2) 11-3...
Page 216 Font 11-4 bizhub PRO 950 (Version 2)
Page 217 Font bizhub PRO 950 (Version 2) 11-5...
Page 218: Font List (Postscript)
Font 11.2 Font list (PostScript) 11-6 bizhub PRO 950 (Version 2)
Page 219 Font bizhub PRO 950 (Version 2) 11-7...
Page 220 Font 11-8 bizhub PRO 950 (Version 2)
Page 221 Font bizhub PRO 950 (Version 2) 11-9...
Page 222: Screen Fonts
For a list of the types of fonts available, refer to "Font list (PostScript)" on page 11-6. For details on the installation of screen fonts, refer to the ReadMe file in the Mac or Windows folder on the "PS Driver CD". 11-10 bizhub PRO 950 (Version 2)
Page 223 In case of Windows 2000/XP/Server 2003, select [Install New Font] from the [File] menu. In the [folders] pane at the lower left, navigate to the location "\Screen fonts\Type 1 Fonts" folder on the "PS Driver CD". Click on [Select all]. Click on [OK]. bizhub PRO 950 (Version 2) 11-11...
Page 224: Font Management Utility
You can use "Font Management Utility" to add the PCL font and the PostScript font to the image controller or delete them from it. For details, refer to the User's Guide contained in PAGESCOPE UTILITIES CD-ROM [Font Management Utility]. 11-12 bizhub PRO 950 (Version 2)
Page 225: Utility Tool
Utility Tool...
Page 227: Pagescope Web Connection
When the [Enhanced Security] is ON, the PageScope Web Connection function cannot be used. When the [Enhanced Security] is turned from ON to OFF, the PageScope Web Connection function is kept at [OFF]. To enable the PageScope Web Connection function, contact your administrator. bizhub PRO 950 (Version 2) 12-3...
Page 228: Outline Of The Pagescope Web Connection
You can print the report as follows; PS Font List PS Demo Page PCL Font List PCL Demo Page Configuration page Make a direct Print Using the PageScope Web Connection allows you to make a Direct Print. 12-4 bizhub PRO 950 (Version 2)
Page 229: Start The Pagescope Web Connection
Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Configuration Summary] from the sub navigation. The [Configuration Summary] page appears. bizhub PRO 950 (Version 2) 12-5...
Page 230 Device Information - Option Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Option] from the sub navigation. The [Option] page appears. 12-6 bizhub PRO 950 (Version 2)
Page 231 Device Information - Consumables Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Consumables] from the sub navigation. The [Consumables] page appears. bizhub PRO 950 (Version 2) 12-7...
Page 232 Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Meter Count] from the sub navigation. The [Meter Count] page appears. 12-8 bizhub PRO 950 (Version 2)
Page 233 Utility Tool Device Information - Online Assistance Click [Information] from the top navigation. The [Information] page appears. Click [Online Assistance] from the left navigation. The [Online Assistance] page appears. bizhub PRO 950 (Version 2) 12-9...
Page 234 Utility Tool Device Information - Network Setting Information Click [Information] from the top navigation. The [Information] page appears. Click [Network Setting Information] from the left navigation. The [Network Setting Information] page appears. 12-10 bizhub PRO 950 (Version 2)
Page 235 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [Default Setting] from the sub navigation. The [Default Setting] page appears. bizhub PRO 950 (Version 2) 12-11...
Page 236 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [Font Information] from the sub navigation. The [Font Information] page appears. 12-12 bizhub PRO 950 (Version 2)
Page 237 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [Macro List] from the sub navigation. The [Macro List] page appears. bizhub PRO 950 (Version 2) 12-13...
Page 238 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [PCL Setting] from the sub navigation. The [PCL Setting] page appears. 12-14 bizhub PRO 950 (Version 2)
Page 239 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [PS Setting] from the sub navigation. The [PS Setting] page appears. bizhub PRO 950 (Version 2) 12-15...
Page 240 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [TIFF Setting] from the sub navigation. The [TIFF Setting] page appears. 12-16 bizhub PRO 950 (Version 2)
Page 241 Click [Current Jobs] from the left navigation. The [Current Jobs] page appears. After selecting [Print] or [Scanner Transmission] from the pull-down menu provided at the upper left of the list, click [Go] to change the contents of the list. bizhub PRO 950 (Version 2) 12-17...
Page 242 Click [Job History] from the left navigation. The [Job History] page appears. After selecting [Print] or [Scanner Transmission] from the pull-down menu provided at the upper left of the list, click [Go] to change the contents of the list. 12-18 bizhub PRO 950 (Version 2)
Page 243: Print The Report
Click [Print Information] from the left navigation. The [Print Information] page appears. Select the report type to be printed. Click [Print]. The report is printed. Note About the report type, refer to "Report to be printed" on page 12-4. bizhub PRO 950 (Version 2) 12-19...
Page 244: Make A Direct Print
Click [Direct Print] from the top navigation. The [Direct Print] page appears. Click [Browse], select file to be printed and click [OK]. The [Direct Print] page will be restored. Click [Print]. The direct print of a specified file is made. 12-20 bizhub PRO 950 (Version 2)
Page 245: Netware
If NDS is not set up properly for the print server and Bindery Service mode is not operating, the print server cannot find the file server and Novell NetWare protocol will be indicated as inactive in the Status Page. bizhub PRO 950 (Version 2) 12-21...
Page 246 Detail Refer to the Novell NetWare manual for details of setup with PCONSOLE of NDS. 12-22 bizhub PRO 950 (Version 2)
Page 247 If you are sure that the bindery context exists in the file server, you can set up the print server with PCONSOLE. Detail Refer to the Novell NetWare manual for details of setup with PCONSOLE. In Bindery mode, only upper-case letters are valid for the printer server password. bizhub PRO 950 (Version 2) 12-23...
Page 248: Unix Printing Through Tcp/Ip
If the systems you are using do not run lpd, refer to "Installing UNIX TCP/IP programs". The UNIX-TCP/IP Programs on accompanying CD-ROM also include source code so that you can recompose host-based code for configuring on other System V platforms. 12-24 bizhub PRO 950 (Version 2)
Page 249 You can indicate to the network interface card lpd what type of image controller it is attached to by either: Accepting the default port setting (PCL, PostScript and other), or Changing the listed emulations via a standard IP based Web Browser. The sections that follow give specific lpd setup instructions for various systems. bizhub PRO 950 (Version 2) 12-25...
Page 250 NIC IP hostname Short Form Filter /usr/lpd/bsdshort Required value Long Form Filter /usr/lpd/bsdlong Required value Name of remote printer queue PRINT Network interface card Name of device to add print1 Name of local queue 12-26 bizhub PRO 950 (Version 2)
Page 251 <IP address of the network interface card> Ping should confirm your IP address with the message: – <IP address of the network interface card> is alive If the connection is confirmed, you can now print. bizhub PRO 950 (Version 2) 12-27...
Page 252 – Enter another printer name or quit setup: Q If necessary, stop and restart your remote daemon. Using a line editor of your choice, edit the /etc/printcap file and change the: rp=entry to PRINT. 12-28 bizhub PRO 950 (Version 2)
Page 253 -p <local printername> -s <remote host name or IP address> – !PRINT – Your system may want its IP address instead of the remote host name. Enable <local printername> Accept <local printername> Printing on Linux bizhub PRO 950 (Version 2) 12-29...
Page 254: Tonecurve Utility
[Keep 100% Density for Text] gets active only when the output value of the tone curve is set below 100%. When [Keep 100% Density for Text] is not checked, take note of the density of characters. 12-30 bizhub PRO 950 (Version 2)
Page 255 Since putting a check on [Use CIE Color] causes a color conversion process to be conducted through the XYZ color space, the level of gradient can be raised, in which case, however, a longer time may be required for output. bizhub PRO 950 (Version 2) 12-31...
Page 256 Utility Tool 12-32 bizhub PRO 950 (Version 2)
Page 257: Appendix
Appendix...
Page 259: Setting The Software Switch
(3) No.8: [0], No.9: [1] --> +0.9mm - -0.9mm The permissible range gets narrower in the or- der of (1) --> (2) --> (3) and is more liable to be recognized as an irregular size. bizhub PRO 950 (Version 2) 13-3...
Page 260 ICMPv6 not eliminated After switching over, the main power is re- from IPSec. (Normally, the operation is made quired to be turned OFF and ON. with ICMPv6 eliminated from IPSec.) 13-4 bizhub PRO 950 (Version 2)
Page 261: Procedure For Installation With Linux
Get the PPD file that has been copied read into the CUPS. And then restart the CUPS. – For example: Enter "/etc/init.d/cups restart". – The following command may be available depending on the method by which the installation is made. – /etc/re.d/init.d/cups restart – /sbin/init.d/cups restart – "killall-HUP cupsd" bizhub PRO 950 (Version 2) 13-5...
Page 262 Using printer Hostname - socket://Hostname:9100 Hostname may be substituted by IP Address, and Port is optional. – In case of USB Printing Select USB Printer #1 (KONICA MINOLTA 950PS(P)). If it is not displayed, restart the machine. – In case of Parallel Printing Select Parallel Port #1.
Page 263 Example using OpenOffice or using Star Suite Paper sizes supported by the bizhub PRO 950 may not be displayed when the OpenOffice is being used. In such a case, follow the procedure given below. However, the procedure described here is applicable when the OpenOffice 1.0.2 is used on the RedHat9 and the procedure and operation given...
Page 264 A list of the currently active print jobs appear. Detail To check the status of completed print jobs, click [Show Complete Jobs]. Refer to "Advanced Options windows" on page 8-18 for more information about "Finishing Options". 13-8 bizhub PRO 950 (Version 2)
Page 265: Glossary
Gateway Hardware or software serving as a point connecting networks. Not only connecting, it converts the format, address, protocol, etc. of the data according to the network to be connected. bizhub PRO 950 (Version 2) 13-9...
Page 266 Indicates IEEE1284 for connecting the printer in many cases. Abbreviation of Portable Document Format. One of electronic documents (extension; .pdf) in the format based on PostScript which can be accessed using Adobe Acrobat Reader, software free of charge. 13-10 bizhub PRO 950 (Version 2)
Page 267 Used to identify how many high-order bits of an IP address are the network address. TCP/IP Abbreviation of Transmission Control Protocol/Internet Protocol. Substantially the standard protocol used for the Internet. Uses IP address to identify each network device. bizhub PRO 950 (Version 2) 13-11...
Page 268 To delete installed software. Abbreviation of Universal Serial Bus. General-use interface standard for connecting a computer and a mouse, printer, etc. Web browser Software to access web pages. Internet Explorer, Netscape Navigator, etc. are exam- ples. 13-12 bizhub PRO 950 (Version 2)
Page 269: Software License List
For example, if you distribute copies of a such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must tell them their rights. bizhub PRO 950 (Version 2) 13-13...
Page 270 4. You may not copy, modify, sublicense, distribute or transfer the Program except as expressly provided under this General Public License. 13-14 bizhub PRO 950 (Version 2)
Page 271 You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA bizhub PRO 950 (Version 2) 13-15...
Page 272 To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. 13-16 bizhub PRO 950 (Version 2)
Page 273 Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) bizhub PRO 950 (Version 2) 13-17...
Page 274 Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 13-18 bizhub PRO 950 (Version 2)
Page 275 Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. <signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice bizhub PRO 950 (Version 2) 13-19...
Page 276 Because of this blurred distinction, using the ordinary General Public License for libraries did not effectively promote software sharing, because most developers did not use the libraries. We concluded that weaker conditions might promote sharing better. 13-20 bizhub PRO 950 (Version 2)
Page 277 License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of bizhub PRO 950 (Version 2) 13-21...
Page 278 Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: 13-22 bizhub PRO 950 (Version 2)
Page 279 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. bizhub PRO 950 (Version 2) 13-23...
Page 280 You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names: 13-24 bizhub PRO 950 (Version 2)
Page 281 General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. bizhub PRO 950 (Version 2) 13-25...
Page 282 13-26 bizhub PRO 950 (Version 2)
Page 283 License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: bizhub PRO 950 (Version 2) 13-27...
Page 284 If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. 13-28 bizhub PRO 950 (Version 2)
Page 285 This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. bizhub PRO 950 (Version 2) 13-29...
Page 286 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 13-30 bizhub PRO 950 (Version 2)
Page 287 :-). 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" bizhub PRO 950 (Version 2) 13-31...
Page 288 NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. Part 2: Networks Associates Technology, Inc copyright notice (BSD) Copyright (c) 2001-2003, Networks Associates Technology, Inc All rights reserved. 13-32 bizhub PRO 950 (Version 2)
Page 289 Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. bizhub PRO 950 (Version 2) 13-33...
Page 290 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. krb5-Libs License Copyright (C) 1985-2005 by the Massachusetts Institute of Technology. All rights reserved. permission notice 13-34 bizhub PRO 950 (Version 2)
Page 291 6. No license is granted to "mirror" the Unicode website where a fee is charged for access to the "mirror" site. 7. Modification is not permitted with respect to this document. All copies of this document must be verbatim. bizhub PRO 950 (Version 2) 13-35...
Page 292 Unicode Data Files include all data files under the directories http://www.unicode.org/Public/, http://www.unicode.org/reports/, and http://www.unicode.org/cldr/data/ . Unicode Software includes any source code published in the Unicode Standard or under the directories http://www.unicode.org/Public/, http://www.unicode.org/reports/, and http://www.unicode.org/cldr/data/. 13-36 bizhub PRO 950 (Version 2)
Page 293 (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity relating to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics. bizhub PRO 950 (Version 2) 13-37...
Page 294 Sun or its licensors is granted under this Agreement. Additional restrictions for developers and/or publishers licenses are set forth in the Supplemental License Terms. 13-38 bizhub PRO 950 (Version 2)
Page 295 Binary Code License Agreement. These Supplemental Terms shall supersede any inconsistent or conflicting terms in the Binary Code License Agreement, or in any license contained within the Software. bizhub PRO 950 (Version 2) 13-39...
Page 296 Deploying Applications with the J2SE Runtime Environment ======================================================== When you deploy an application written in the Java programming language, your software bundle will probably consist of the following parts: Your own class, resource, and data files. A runtime environment. 13-40 bizhub PRO 950 (Version 2)
Page 297 The following section contains a list of the files and directories that may optionally be omitted from redistributions with the J2SE Runtime Environment. All files not in these lists of optional files must be included in redistributions of the runtime environment. ----------------------------------------------------------------------- Optional Files and Directories ----------------------------------------------------------------------- bizhub PRO 950 (Version 2) 13-41...
Page 298 Java support in Internet Explorer and Mozilla family browsers; these files are not needed in a private JRE redistribution. bin/java.exe bin/javaw.exe bin/javaws.exe bin/javacpl.exe bin/jucheck.exe bin/jusched.exe bin/JavaWebStart.dll bin/NPJPI*.dll (The filename changes in every release) bin/NPJava11.dll bin/NPJava12.dll bin/NPJava13.dll 13-42 bizhub PRO 950 (Version 2)
Page 299 These alternative soundbanks may be included in redistributions of the J2SE Runtime Environment. - The javac bytecode compiler, consisting of the following files: bin/javac [Solaris(TM) Operating System and Linux] bin/sparcv9/javac [Solaris Operating System (SPARC(R) Platform Edition)] bizhub PRO 950 (Version 2) 13-43...
Page 300 Redistributors may also override classes in the org.w3c.dom.*packages, or other classes whose sole purpose is to implement these APIs. ----------------------------------------------------------------------- The cacerts Certificates File ----------------------------------------------------------------------- Root CA certificates may be added to or removed from the J2SE certificate file located at <java- home>/lib/security/cacerts. 13-44 bizhub PRO 950 (Version 2)
Page 301 For written permission, please contact apache@apache.org. 5. Products derived from this software may not be called "Apache", nor may "Apache" appear in their name, without prior written permission of the Apache Software Foundation. bizhub PRO 950 (Version 2) 13-45...
Page 302 "Not a Contribution." "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. 13-46 bizhub PRO 950 (Version 2)
Page 303 Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. bizhub PRO 950 (Version 2) 13-47...
Page 304 5. Products derived from this software may not be called "IAIK PKCS Wrapper", nor may "IAIK" appear in their name, without prior written permission of Graz University of Technology. 13-48 bizhub PRO 950 (Version 2)
Page 305 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. bizhub PRO 950 (Version 2) 13-49...
Page 306 OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS.COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. 13-50 bizhub PRO 950 (Version 2)
Page 307 Copyright FAQ for common questions about using materials from our site, including specific terms and conditions for packages like libwww, Amaya, and Jigsaw. Other questions about this notice can be directed to site-policy@w3.org. bizhub PRO 950 (Version 2) 13-51...
Page 308 4. The names "Apache" and "Apache Software Foundation" and "Apache Turbine" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact apache@apache.org. 13-52 bizhub PRO 950 (Version 2)
Page 309 Use of any of this software is governed by the terms of the license below: Copyright Status SAX is free! In fact, it's not possible to own a license to SAX, since it's been placed in the public domain. No Warranty bizhub PRO 950 (Version 2) 13-53...
Page 310 The licenses which follow do not apply to binary distributions of the software. They are applicable only to source distributions. The following software may be included in this product: Common Unix Printing System API Libraries (CUPS API library); 13-54 bizhub PRO 950 (Version 2)
Page 311 Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. bizhub PRO 950 (Version 2) 13-55...
Page 312 It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 13-56 bizhub PRO 950 (Version 2)
Page 313 Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. bizhub PRO 950 (Version 2) 13-57...
Page 314 Original Code, SGI hereby grants Recipient a worldwide, royalty-free, non-exclusive license, to do the following: (i) under copyrights Licensable by SGI, to reproduce, distribute, create derivative Apache License 13-58 bizhub PRO 950 (Version 2)
Page 315 (c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and bizhub PRO 950 (Version 2) 13-59...
Page 316 See the License for the specific language governing permissions and limitations under the License. jaxen.codehaus.org, Apache ’style’ license $Id: LICENSE,v 1.3 2002/04/22 11:38:45 jstrachan Exp $ Copyright (C) 2000-2002 bob mcwhirter & James Strachan. 13-60 bizhub PRO 950 (Version 2)
Page 317 "This product includes software developed by the JDOM Project (http://www.jdom.org/)." Alternatively, the acknowledgment may be graphical using the logos available at http://www.jdom.org/images/logos. bizhub PRO 950 (Version 2) 13-61...
Page 318 JDF Schema, JDF Editor, Online Documentation for C++ API, the Alces application, the Elk application, and any part or component thereof (hereinafter "CIP4 Software"). Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 13-62 bizhub PRO 950 (Version 2)
Page 319 4.1 above until they begin to sell, market or attempt to sell such products. 5 END USER DOCUMENTATION bizhub PRO 950 (Version 2) 13-63...
Page 320 L. Peter Deutsch. Thanks to all the people who reported problems and suggestd various imporvements in zlib; they are too numerous to cite here. libjpeg This software is based in part on the work of the independent JPEG Group 13-64 bizhub PRO 950 (Version 2)
Page 321: Index
Index...
Page 323 Paper Type 9-12 7-41 Per Page Setting 8-26 PI Front Cover 7-20 8-20 Pre-Punched 8-28 9-16 Print Density Printer View 7-58 9-25 Proof and Print Proof Print 7-24 Properties window Punch 7-37 8-23 9-21 bizhub PRO 950 (Version 2) 14-3...
Page 324 Index 14-4 bizhub PRO 950 (Version 2)

Konica Minolta bizhub pro 950 User Manual

1 Introduction

8 Postscript PPD Printer Driver Setting (Windows)

2 Overview

3 Installation of the Printer Driver (Windows) (Manual Installation Using the Add Printer Wizard)

4 Installation of the Printer Driver (Macintosh)

5 Uninstallation of the Printer Driver

6 Basic Printing and Various Function

7 PCL Printer Driver Setting (Windows)

9 Postscript PPD Printer Driver Setting (Mac os X)

10 Troubleshooting

11 Font

12 Utility Tool

13 Appendix

14 Index

Quick Links

Troubleshooting

Related Manuals for Konica Minolta bizhub pro 950

Summary of Contents for Konica Minolta bizhub pro 950

Table of Contents