Netware - Konica Minolta bizhub pro 950 User Manual

Print operations
Hide thumbs Also See for bizhub pro 950:
Table of Contents

Advertisement

Utility Tool
12.2

NetWare

This printing system works with IPX/SPX (Internetwork Packet Exchange / Sequenced Packet Exchange).
This section explains how to configure a NetWare File Server, a NetWare Print Server, and a NetWare queue.
The image controller supports the system environment described below.
NetWare Version
NetWare 3.2
NetWare 4.x
NetWare 5.x
NetWare 6
Setup for NetWare 3.x
Before setting up NetWare, you have to define the print server name, etc., from the Web Utilities.
The setup procedure of NetWare 3.x is as follows. To perform this procedure, you need authorization to
perform this procedure.
1
Start up PCONSOLE and select the file server to use.
Refer to the manual of Novell NetWare for setting up with PCONSOLE.
2
Generate and assign a print queue.
3
Define the network interface card as the print server.
4
Define the notification list/password as necessary.
5
Set up the primary file server as necessary.
On completion of setup, turn off the main power of the image controller and the main body printer and turn
it on again.
The main body printer will print out a Status Page indicating the file servers equipped with print server and
the queues that the file servers will service.
Note
Define the primary file sever if the network connects to many sites and has more than one file server.
PCONSOLE should be used to set up the primary file sever.
Setup for NetWare 4.x-6
Novell NetWare 4.x-6 can operate in two modes, NetWare Directory Service (NDS) and Bindery Emulation
Service (Bindery Emulation). Bindery Emulation and NDS will be executed simultaneously. It is also possible
to set up the print server so that it operates only in Bindery Emulation mode or in NDS mode.
The print server set up for NDS mode will also service the file server of an old version operating in Bindery
mode.
If NDS is not set up properly for the print server and Bindery Service mode is not operating, the print server
cannot find the file server and Novell NetWare protocol will be indicated as inactive in the Status Page.
bizhub PRO 950 (Version 2)
Protocol
IPX
IPX
IPX
TCP/IP
Emulation
Bindery
NDS
NDS
12
Service Mode
Pserver/Rprinter
Pserver/Nprinter
Pserver
NDPS(lpr)
12-21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents