Konica Minolta bizhub pro 950 User Manual page 58

4
5
Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.
6
Click the close button at the upper left corner of the dialog box.
– When the "Apply configuration changes?" message appears, click the [Apply].
Adding a printer
1
Select "HDD" - "Applications" - "Utilities" where the driver was installed, and then double-click "Printer
Setup Utility" to open it.
2
When the Add Printer dialog box appears, click the [Add]. When the printer list appears, click the [Add].
3
Click the [IP Printing].
4
Select "Internet Printing Protocol" from "Printer Type".
5
In "Address", enter the IP address of this machine.
6
Select "KONICA MINOLTA" in "Printer Model", select the desired model from the list of models, and
then click the [Add].
– If the selected printer is registered in the printer list, the setting procedure is completed.
4-10
Installation of the printer driver (Macintosh)
bizhub PRO 950 (Version 2)