General Problems Of Postscript - Konica Minolta bizhub pro 950 User Manual

10
10.3

General problems of PostScript

Problem
A PostScript Error message dis-
plays.
A PostScript Error message displays
when attempting to get a printout
from any computers are in use.
A PostScript Error message displays
when attempting to get a printout
from a specific application.
A PostScript Error message displays
when attempting to get a printout
from a specific file.
Fonts cannot be downloaded.
Non fixed size paper can not be
printed correctly (Macintosh).
10-6
Response
A search can be made from [https://www.adobe.com/cfusion/support/in-
dex.cfm?event=membership&retur-
nURL=%2Fcfusion%2Fsupport%2Findex%2Ecfm%3Fevent%3Dportal%26l
oc%3Den%5Fus&loc=en_us].
There may be loose connections in the printing system. Recheck all of connec-
tions.
Error conditions may exist in the application. Try to print out a simple test file.
If this also does not succeed, reinstall the application in question.
It is possible that the print setting for the file is wrong, that graphics contained
in the file are damaged, or that bad elements are contained in the file.
Find a print setting that does not cause any PostScript Error message to ap-
pear, and try to get a printout. If this fails, save the file as a new file.
It is possible that [Spool Print Jobs in HDD before RIP] is set to [Enable] in
Printer Setting Menu on the copier's control panel.
Set [Spool Print Jobs in HDD before RIP] to [Disable], switch off the copier's
main power, wait 10 seconds or more, switch it back on, and then try down-
loading fonts again.
For details on how to download fonts, refer to the User's Guide that comes
with the fonts.
The direction in which non fixed size paper is loaded in the copier may be in-
correct.
Rotate the paper direction 90 degrees and then try printing after changing the
settings of the driver and copier accordingly.
Troubleshooting
bizhub PRO 950 (Version 2)