Embroidery Information - Husqvarna Viking Designer Jade 35 User Manual

Embroidery Information

To view information about a design before loading it to
embroidery mode, select the file in the load menu and press
the embroidery info button (C).
If a design file is selected, an info view opens where you can
see design size, number of stitches and number of color
blocks in the design.
If a font file is selected, an info view opens where you can
see font name, size and character set.
Press the left arrow button or info button to close the
information view and go back to the load menu.
When you have loaded a design into embroidery mode, press
the embroidery info button to view information about the
current design.
1. Design name
2. Number of color blocks in the design
3. Number of stitches in the design
4. Color block list. All colors in the loaded design are
shown in the order they will be embroidered. The current
color block is always placed at the top of the list and is
marked with a thread spool. Each listed color shows
order, name, thread manufacturer and color code. Use
the up/down buttons to scroll through the list.
Note: In the downloadable software you can find information about
thread manufacturers and thread type abbreviations. See
Complimentary Embroidery Intro Software (PC), page 24.
Press the embroidery info button once more to close the
information view.
7 Embroidery Mode 67