Sewing A Stitch Program 5:4; To Save A Stitch Program 5:4; Delete Saved Stitch Or Program - Husqvarna Viking Viking Topaz 40 User Manual

SEWING A STITCH PROGRAM
To sew the stitch program, load to Sewing Mode by touching
the OK icon at the top right corner of the screen. You can
also press on the foot control and the stitch will load to Sew
Mode and start to sew.
Note: The stitch program can only be opened, saved and sewn out in
sewing mode.
Adjust the Entire Program
To adjust the entire program, go to Sewing Mode.
Adjustments made here will affect the whole program.
TO SAVE A STITCH PROGRAM
Once you are finished with your stitch, touch the OK icon
at the top right hand corner to load the program to Sew
Mode. Touch the Save to My Stitches icon and the Save to My
Stitches window will open. The My Stitches menu (U-menu)
has three pages, which you can scroll between using the
arrows directly below the screen.
Save
Previously saved stitches or stitch programs are shown in the
My Stitches menu (U-menu). The new stitch or program can
be saved at any free position. Simply touch a free position, and
your stitch or stitch program is stored there.
Touch an occupied position and a pop-up message will ask
you to confirm the overwriting of the old stitch. Touch OK to
replace the old stitch with the new one. Touch Cancel to close
the pop-up message, and choose another saving position.

Delete Saved Stitch or Program

To delete a saved stitch or program, touch Delete and then
touch the stitch or stitch program. Once you have touched
the delete icon, an image will be shown at the bottom of your
screen. As long as that image is shown the Delete function
is active, and you can delete stitches. Touch the Delete to
deactivate the function. When you touch a saved stitch to
delete it, a pop-up message will ask you to confirm the
deletion. This is only available when you are in the Save to My
Stitches window.
Note: If you Touch & Hold Delete, you can delete all your stitches in
My Stitches.
5:4
OK
Save to My
Stitches
Delete