Upper Thread Tension - Functions Of The Service Menu 3; Sensor Check - Functions Of The Service Menu - Husqvarna Viking Designer I Service Manual

Sensor check - Functions of the service menu 2.

Operation
Get into the service program. Touch Sensor-
Clr - Used to erase everything programed
in the programmable memories ot the
machine

Upper thread tension - Functions of the service menu 3.

To facilitate the setting of the upper thread tension there is an electronic adjustment
in the Service menu 3.
Operation
Get into the service program.Touch Tension-
104 72 47-26
Service Program
, row 3.
Active square is filled
Check of armshaft's first sensor (stop right function)
Check of armshaft's second sensor (stop right function)
Check of needle
Check of pressarfoot's first sensor
Check of pressarfoot's second sensor
Check of lower thread guard indicator
Check of upper thread guard indicator
Check if embroidery unit is connected
Embroidery hoop sensor-
The bobbin winding sensor
The bobbin winding sensor -
Button hole sensor check
-,row 2. The machine will enter Service Menu 3.
Tension Norm -Blue
Is used for adjustment of the upper thread tension at
normal sewing . The value is normally set between +10
and -10. The value on the display is changed gradually
each time you touch the touch area.
Note! There are limitations in the setting. The
value of the setting could be higher then +10 or
lower then -10 .
Tension Embr- Red
Is used for adjustment of the upper thread tension at
embroidery sewing.The value is normally set between
+10 and -10.
The value on the display is changed gradually each
time you touch the touch area
Note! There are limitations in the setting. The
value of the setting could be higher +10.
Toucharea
2,5x0 The machime sews a straight stitch 2,5 mm
4x0 The machine sews a straight stitch 4 mm
6,0x0 The machine sews a straight stitch 6 mm
4x4 The machine sews a zig zag stitch 4x4 mm
0,4x6 The machine sews a zig zag stitch 0,4x6 mm
Embr The machine sews the first embroidery on an
inserted embroidery disk.
Back Back to service menu 1
Indicates when sensor is on calibration mark
Indicates when bobbin is wounded.
Back to service menu 1
9