Led Indicator Details - Toshiba VIPedge User Manual

LED Indicator
Details
Table 4 LED Indicators
LED
Extension In-Use
(access outside line)
Incoming Call
(while ringing)
Hold (outside line) If using Pooled Line
Grp, the hold indication is only at the
station that places the call on hold.
Hold – Consultation
(during consultation/transfer to another
station)
Hold – Exclusive (outside line)
Hold – Recall
(when held call recalls your idle station)
Hold – Exclusive Recall
Internal Call
(while station ringing)
Busy Station Transfer
(outside call transferred to your busy
station from a designated station or AA)
After disconnecting first call...
Conference
VIPedge UG 12/12
Each line and Programmable Feature Button has a LED next to it which indicates
the status of the line or feature associated with the button. Line LEDs light red or
green and flash at varying rates to indicate call status (see table below)..
Your Station (Green)
Interval Rates
2 seconds On, 1/8 second Off
— 1/8 second On/Off
1 second on at 10 pulses/sec-
ond —1 second Off
4 pulses/second for 1/8 second
On/Off
10 pulses/second
10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
Your extension button flashes
10 pulses/second—1 second
Off
4 pulses/second, 1/8 second
On/Off
10 pulses/second
10 pulses/second
LEDs on the telephone flash at different speeds depending on the
Note:
function performed. Flash rates listed in the table above.
TOSHIBA
VIPedge
The Basics
Other Station (Red)
steady
one second On/Off
1/2 second On/Off
steady
steady
flashes
steady
[SDN] red flashing or
green ringing
3/4 second on, 1/8 sec-
ond Off
2 pulses/second
steady
23