Table of Contents
Advertisement
VIPedge
Feature Operations
Call Park
Park a Call
Retrieve a Parked Call
32
The Call Park feature enables you to hold a call temporarily in a location other
than your telephone. These areas are called orbits. You or another telephone
user can retrieve a parked call from its orbit by specifying the orbit number.
You can specify one of 20 General Park Orbits (7000~7019) or a valid
extension number within the system.
Once you have parked a call in an orbit, you can:
Hang up and retrieve the parked call at a later time.
•
Originate another call.
•
Access a voice paging device to announce the parked call for pickup from
•
another station.
If you park a call and it is not retrieved, it will recall to the parking station and
one of the following occurs:
If your station is idle when the system Call Park recall timer expires, the
•
parked call automatically recalls to your station.
If your station is busy, the parked call camps on.
•
If you have an LCD telephone, you can let the system automatically select an
available orbit number which displays on your LCD.
1. While on a call, press Park in Orbit or press Cnf/Trn + #33. The LED
flashes green (consultation-hold). If you were on an extension during the
call, and you have line button on your telephone, the line LED will flash
until the call is picked up (depending on programming).
2. Specify the Park Orbit using one of the following:
*
•
Press
and the system automatically selects a General Park
Orbit between 7000~7019. The chosen orbit appears on the
LCD.
•
Enter a valid extension.
•
Press # and the system automatically selects your extension as
the orbit.
3. Hang up. The caller's extension or line number and the orbit number are
shown. If the parked call is not retrieved within a specified time, the call
rings back to your telephone. When a parked call recalls your telephone,
the LCD shows the line or extension that is recalling and the orbit number.
1. Press Park in Orbit or press your extension button + #32.
2. Enter the Orbit Number where the call is parked or # for the extension
from which you are calling. You cannot use
The extension LED flashes at the in-use rate when the call is retrieved.
TOSHIBA
*
to retrieve a parked call.
VIPedge UG
12/12
Advertisement
Table of Contents
