Microphone Cut-Off; Off-Hook Call Announce (Oca) - Toshiba VIPedge User Manual

VIPedge
Feature Operations

Microphone Cut-Off

Off-Hook Call
Announce (OCA)
Make an OCA Call
40
1. Dial an internal extension. You may hear ringing or busy tone.
2. Press Msg or 7. The Msg LED flashes red on the called telephone. At
your telephone, the Msg LED lights steady red and the LCD shows the
station number where the Message Waiting light was sent.
3. If you decide to cancel the Message Waiting light at this point, press Msg
or 7 again while ring-over tone is playing and the light will cancel. If you
want to cancel the message later, call the telephone where you set the
message and press 7 twice.
4. Press Spkr. Your Msg LED turns Off. The Msg LED on the called
telephone flashes until the called party presses the flashing Msg button
which calls you back.
5. Turn off the Message LED.
The two ways to turn Off a Message LED are:
Method 1
1. Press #64 plus the extension number that has the message light
set.
2. Press Spkr or hang up to end the call.
Method 2
1. Dial the extension that has the Message LED.
2. Press 77.
3. Press Spkr or hang up to release your telephone.
This feature prevents callers from monitoring the sounds near your telephone
when your telephone receives a Handsfree Call or cuts-off the telephone
microphone while on a speakerphone call. When the feature is ON, the
Microphn Cut-off LED lights steady red and the Mic and Spkr LEDs do not
light when your telephone is called. When the feature is OFF, the Microphn
Cut-off LED is not lit and your microphone works. The Microphn Cut-off
functions on Handsfree Answerback and speaker OCA calls for privacy.
To turn the microphone ON/OFF
Microphn Cut-off
Press
•
Off-hook Call Announce (OCA) enables you to complete a call to a busy
telephone. Your telephone must be programmed to either announce
automatically or to announce after you press a button on your dial pad. The
destination telephone must be programmed to accept an OCA. The
announcement may be delivered over the speaker.
– Dial an extension. When you hear a busy tone press 5 and,
Manual
•
after one long tone, you can talk through the speaker of the destination
telephone. The person you are calling has answering options as
described below.
TOSHIBA
to toggle between ON/OFF.
VIPedge UG 12/12