Speakerphone/Microphone Sensitivity Adjustment; Telephone Terminology - Toshiba VIPedge User Manual

Speakerphone/
Microphone
Sensitivity
Adjustment
Telephone
Terminology
VIPedge UG 12/12
When you are using the speakerphone, high ambient noise levels may cause the
party you are talking with to be to cut off frequently. If this happens, follow these
steps to lower the sensitivity of the microphone on a IP5000-series telephone. The
default is normal sensitivity.
1. Press 3+6+9+Hold (simultaneously).
2. Press Sound.
3. Room noise FB6 to Toggle ON = noisey room.
4. Press Set to set the option.
5. Go off-hook, then on-hook to exit the program mode.
When making or receiving calls on your IP5000-series telephone you may
experience one or more of the following call features depending on how your
telephone is configured.
Line – is synonymous with trunk which is the line that connects you to the
•
PSTN (Public Switched Telephone Network). Line can be:
• a button on your telephone set designated for outgoing calls
• your DN button followed by dialing 9.
Automatic Line Selection (ALS) – ALS is engaged on outgoing calls. Lift the
•
handset or press Spkr to hear dial tone, the steady green Line LED indicates
ALS in enabled. The second line of the LCD will display the method of dialing
available, followed by the digits dialed.
Ringing Line Preference – Answer any incoming call by lifting the handset or
•
pressing Spkr. There is no need to press the ringing line button to answer the
call when ringing line preference is enabled.
Tone First Signaling – Internal incoming calls only: telephone rings in
•
standard ring tone, lift handset or press Spkr to answer call.
Voice First Signaling – Internal incoming calls only: a long tone is heard,
•
followed by the caller's voice, this will automatically engage the Spkr to allow
for hands free communications. Lift the handset if desired (for privacy). When
Voice First Signaling is enabled the telephone does not ring on internal
incoming calls.
Hot Dialing – Dial a telephone number from the dialpad, the telephone
•
automatically selects a line, shown with a green LED, and turns on the Spkr
and Mic LED's. When Hot Dialing is not turned on the handset should be lifted
or Sprk should be pressed in order to make a call.
TOSHIBA
VIPedge
The Basics
17