Voluntary Account Codes - Toshiba VIPedge User Manual

VIPedge
Feature Operations
Voluntary Account
Codes
Using the Account Code
Button
Using Access Codes
26
There are two ways to dial using a Voluntary Account Code:
This requires a Programmable Feature Button to be programmed on
Note:
your telephone set.
1. While talking on a line, press the Account Code button. LCD telephones
prompt you to "ENTER ACCOUNT CODE NOW."
2. Enter the account code digits. The LCD prompt disappears upon entry of
the first account code digit. After the account code is entered, the time
indicator is restored to the LCD.
3. If your station is set for Verified Account Codes, you hear a confirmation
tone when the code is valid. If the code is invalid, you hear two short
tones.
4. Enter the Account Code. Your conversation is not interrupted.
It's a good idea to warn the other party that you will be disconnected
Note:
momentarily when you enter the access code. Once the code is
entered, you will be connected again.
1. After accessing a line, press Cnf/Trn. Once you press Cnf/Trn, your
call is interrupted; you and the other party cannot hear each other. You
will hear feature dial tone.
2. Dial #46. LCD telephones prompt you to "ENTER ACCOUNT CODE
NOW."
3. Enter the account code digits. The prompt disappears upon entry of the
first account code digit. After the account code is entered, the connection
is restored and the LCD shows the time.
TOSHIBA
VIPedge UG 12/12