Table of Contents
Advertisement
Features and Menus
Intercom prot.
intercom protection. When intercom protection is activated, no intercom
announcements can be made to your telephone (see also page 61).
4.2.7 "Connections" Menu
Select
Connections
Select
Call pick-up
■
: This accepts a call for another telephone in your pick-up group.
Pick-up
If the called subscriber is a member of a user group for which pick-up pro-
tection is active, then you cannot pick up calls to this subscriber's call number.
■
Pick-up select.
enter the call number of the other telephone.
If the called subscriber is a member of a user group for which pick-up pro-
tection is active, then you cannot pick up calls for their call number.
■
: You accept a current call from a different terminal at your DECT tele-
Take
phone and continue your call on your DECT telephone. The prerequisite is that
your DECT telephone and the other terminal have the same internal call
number.
Select
, then ...
Dial
■
Announcement...
announcement on another system telephone. Under
(Intercom protection): Switching on (
Note: The following features are carried out if this is permit-
ted by the current call state of your telephone. You can also
find these features in the call-dependent menus.
and then select ...
, then ...
: You can answer a call for any other telephone. To do this,
Note: If the other terminal is already in the call state (e.g. an
answering machine is in announcement mode), you pick up
the call. The subscriber for whom you pick up the call must
belong to a user group for which the "Call removal" authori-
sation is activated, otherwise "Pick-up selective" is not possi-
ble.
After entering the call number, you can initiate an
The Menus
) or switching off (
On
enter the call
To:
)
Off
83
Advertisement
Table of Contents
