Features And Menus; How To Set Features; Main" Menu - Aastra 142d User Manual

Features and Menus

Features and Menus

How to Set Features

There are different ways to set the features of your telephone and of the system:
Using Menus
Use the mobile unit menus to conveniently make settings on the desired features
(please refer to Menu Navigation starting on page 37 also).
Some menu entries are only shown on your telephone when you belong to a user
group authorised to use the corresponding feature. Contact the system administrator
when you have questions on specific features or are not able to use a feature satisfac-
torily.
Using code number procedures
Many features can also be configured by entering code numbers. Code numbers are
* #
entered via the and keys respectively and in combination with a specific series
0 9
of numbers ( to keys).
Code number input is especially intended for analogue terminals on your system.
Code numbers can also be used on your mobile unit. They are described in the short
user guide "Code-number Procedures" (this is supplied with the system). A current
online overview on the Codes entry is available anytime in the System Info menu of
the OpenCom 100 / Aastra 800 communications system Web console.

"Main" Menu

This menu contains all available features. Some of the menu items can be found in
other state-dependent menus as well. For example, received e-mails are available in
B
Messages
the Main menu under and also available via the Info key. Features
which affect your telephone's reachability (e.g. call protection activated) are located in
Active Features
the Main menu and also in the menu which you can access via
B
long key press of the Info key.
Press the Menu softkey longer or, if the telephone is idle, press the Menu softkey
Main menu
briefly and select the menu entry. This displays the primary menu
groups...
81