Chapter 6 Default Settings; How To Set The Eds Mode - Star Micronics XB24-200 User Manual

chapter 6
DEFAULT SETTINGS
From the control panel you can change the parameters that define how your
printer works. Parameter just means "variable". If you are familiar with
earlier kinds of printers, you'll understand that this printer parameters
control pretty much the same things DIP switches do. This frmction is called
as Electronic DIP Switch (FEDS) mode.
HOW TO SET THE EDS MODE
The EDS mode has 29 kinds of functions you can set as the power-on default
Turn the printer on while simultaneously holding the ~'~-3~ 7,
[ PAPER FEED]
and
1
ON LINE 1
buttons.
The "ELECTRIC DIP SW' message will show on the display, and enter the
EDS mode.
In EDS mode, the buttons on the control panel are used as shown below in
Figure 6- 1.
I
0 POWER
1
I
&
I
MODE SET/EJECT
FONT PITCH PARK
PAPER FEED
L ON LINE
Srlcct Swtch number
Set the definitmn
Figurr ST. Button functions in the EDS mode.
57