Interface Cartridges - Star Micronics XB24-200 User Manual

INTERFACE CARTRIDGES
You can use the Serial RS-232 Interface with the optional Serial Interface
Cartridge (ISgXL), or extend the print buffer by installing the optional
Buffered ParaIlel Interface Cartridge (IP-128XL), instead of the Standard
Interface Cartridge.
If you want to use the Serial Interface Cartridge, set the DIP switches on the
board before instalI it to the printer.
1. Turn off the power switch and disconnect the power cord from the power
soufce.
2. Disconnect the interface cable if attached.
3. Compress the projected parts on the right and left, and pull the Standard
Interface Cartridge to remove it from the printer.
Figum 315. Remove the Standard Interface Cartridge from the printer.
4. Insert the optional Interface Cartridge securely into place.
If it is not fuIIy inserted, the printer will not properly print.
5. Connect the interface cable to the connector.
NOTE: Store the removed Interface Cartridge in a safe place.
25