Loading The Paper With Optional Automatic Sheet Feeder - Star Micronics XB24-200 User Manual

Loading the paper with optional Automatic Sheet
Feeder
If you are not using the optional Automatic Sheet Feeder, refer to the
previous section.
1. Install the optional Automatic Sheet Feeder as described in Chapter 3.
-
--
-
-
-
I
F/gum 411. Install the optional Autmatic Sheet Feeder.
2. Use the printer's EDS mode to select ASF. (For details, please refer to
Chapter 6.)
-
3. If fanfold paper has already been loaded in the printer, park the paper
- -
through the rear slot.
4. Full the printer release lever forward to load single sheets.
-
5. When you am using Single-Bin ASF, pull the paper loading lever forward
to pull the hopper out until it is in position.
-
In case of the Dual-Bin ASF, pull both pressure bar levers forward to
open the pressure bar.
40