Setting Up; Mounting The Platen Knob - Star Micronics XB24-200 User Manual

SETTING UP
Place the printer in the desired location, and remove all packing material
from inside the printer cover. This packing material is intended to prevent
damage to the printer while in transit. You will want to keep all the packing
material, along with the printer carton, in case you have to move the printer
-
to a new location.
-
Mounting the platen knob
The platen knob is packed into an accessory box with other accessories for
the Wide carriage printer.
NOTE : For the Normal carriage printer, the platen knob is mounted on the
printer at factory.
-
Mount the knob on the platen shaft, which is located on the right-hand side
of the printer. Rotate the knob on the shaft before pushing the knob fully into
-
position.
Platen knob
-
-
-
-
-
"bd
-
F/gwv 2-Z Mount the platen knob.
-
-
10
-