Other Parameters - Star Micronics XB24-200 User Manual

Other parameters
The Other parameters are assigned to Bank "G", including these functions:
. STROBE timing
This switch controls the timing of the interface.
Most computers can communicate with the Normal timing, as the factory-
setting.
If you were not possible to communicate with your computer to the printer,
set this switch to "INVERSE".
l
EDS setting
If you want to cancel your EDS settings and return to the factory-settings,
set this switch "RESET".
Following table shows the display messages and those meanings for the
Bank "G".
Display Message Mean&
Gl STROBE NORMAL
set the normal inmface timiig.
I Gl STROBE INVRSE I Settheinversedinterfacetiming.
I
G2 EDS
CURRENT
Set the current EDS settings.
G2 EDS RESET
Resets the EDS setting to the factory-set.
-
--
70