Store Macro Definition - Star Micronics XB24-200 User Manual

-
Store Macro Definition
You can store the current settings to the printer for later use with the
following procedure:
1.
Press the I ON LINE
1 button to set the printer off-line.
2. Press the I- button and hold it down.
3. While holding the
m
button down, press the
I I
PITCH
button and hold them down until the "SET MACRO" message shows on the
display.
4.
Release both buttons at the same time after this message to store the
current setting.
If you release these buttons after the "CLEAR MACRO" message is shown
on the display, the macro is cleared.
NOTE : You can store the following settings with this procedure.
l
Current Font and Bitch
l
Current auto-loading amount for cut sheet
. Current auto-loading amount for continuous paper
l
Current auto-loading amount in ASF mode
l
Current print color
Data to be stored am controlled in Standard mode and IBM mode separately.
For example, the data stored in the Standard mode are not effective in the
IBM mode, and vice versa.
-
56
-