Importing Setup Data From A Configuration File; Returning To Default Settings - Star Micronics NX-2460 User Manual

Importing setup data from a configuration file
Use the following procedure to load setup data from a previously saved
configuration file.
While in the User Setup Utility, select the Load item from the menu bar.
The currently selected configuration file is the one that is highlighted in the
list that appears on the display.
Click on the up and down arrows on the scroll bar at the right side of the list
or use the keyboard's up and down arrow keys to move the highlighting up
and down until the name of the configuration file you want to use is
selected (highlighted).
After selecting the configuration file you want, press Enter.

Returning to default settings

To make all settings revert to their defaults (original settings), select the
Load item from the menu bar, highlight DEFAULT in the light of files, and
press Enter.
Importing setup data from a configuration file
Exit Load Save General
= Scroll up = Scroll down
Font Paper Adjust.
DEFAULT
= Enter
Port Help
= Menu Select
29