Layout Parameters - Star Micronics XB24-200 User Manual

Layout parameters
The Layout parameters are assigned to Bank "E", including these functions:
l
Multi-part mode
You can use up to 3-ply paper with normal mode. If you want to print on
4-ply or S-ply paper, set the Multi-part mode ON.
l
Paper-out detector
When this switch is OFF the printer ignores the paper-out detector and
prints down to (and beyond) the bottom edge. Otherwise leave it ON.
l
Automatic Sheet Feeder
In order to use the optional Automatic Sheet Feeder, set this switch to the
related position.
l
Top margin setting for each paper type
Sets the first line position on the each paper type.
9 Bottommargin
Sets the last line position on the paper.
l
Lines per Inch
Sets how many lines to be printed in one inch.
Following table shows the display messages and those meanings for the
Bank "E".
Display Mesaage
Meaning
El MULTIPART OFF
Multi-partmodeiscancelled.
El MULTIPART ON
Multi-part mode is selected.
E2 PAPER-OUT OFF
Paper-outdetectorisdisabled.
E2 PAPER-OUT ON
Paper-out detector is enabled.
E3 ASF 0 F F Optional
ASF is not installed.
E3 ASF-SINGL ON
Single-Bin ASP is installed.
E3 ASF-DUAL ON
Dual-Bin ASF is instakd.
-_
-
-
E4 T.MGN-CUT l/6
Topmarginforcutfoxmsissetto 116inch.
E4 T.MGN-CUT 2/6
Topmarginforcutformsissetto2/6inch.
E4 T.MGN-CUT 3/6
Topmarsjnforcutformsissetto3/6inch
I
E4 T.MGN-CUT 4/6
I
Toumarninforcutformsissetto4/6inch.
I
s 1
E4 T . MGN - CUT 5/ 6
Top margin for cut forms is set to 5/6 inch.
E4 T.MGN-CUT 6/6
Topmarginforcutformsissetto6/6inch.
66