Font Button - Star Micronics XB24-200 User Manual

FONT button
This button selects the font to he printed. Roman font is selected at power-
up unless the default settings are changed. To change the font, set the printer
off-line, then press the I YZ%Z I button repeatedly until the message on
the display illuminates. The selections cycle in the following order:
Font
Roman
Sanserif
Courier
Prestige
Script
OCR-B
OCR-A
Orator with small caps
Orator with lower case
TW-light
Letter Gothic
Blippo
Message
ROMAN
SANSERIF
COURIER
PRESTIGE
SCRIPT
OCR-B
OCR-A
ORATOR
ORATOR-2
TW-LIGHT
L GOTHIC
BLIPPO
Font
H-Gothic
Orate
Cinema
Bar code 39
UPCEAN
Old Style
Firenze
SLQ Roman
SLQ TW-light
SLQ Script
Draft
High-Speed Draft
Message
H-GOTHIC
ORANE
CINEMA
CODE 39
UPC/EAN
0 STYLE
FIRENZE
ROMAN SQ
TW-LIGHT SQ
SCRIPT SQ
DRAFT
HS-DRAFT
-I
If a Font cartridge is not installed, the selection of related Font is skipped.
If you want to change the character quality quickly, press this
MODtz
FONT
1 button in on-line. The printer stops printing and enters the
Quick mode, with
"QUICK MODE"
message on the display.
-._
If you continue to press the [ YE?,% ] button, the display changes to
"HS-DRAFT", "DRAFT"
and LQ/SLQ (curretly-selected SLQ or LQ font) --
repeatedly.
-
Printing will be performed according to the print mode message on the
display which selected when the button is released.
46