Star Micronics XB24-200 User Manual page 43

Clamp lever
ractor cover
Flgwv +o. Mount the hfold paper to the Pull Trader Unit by turning the platen knob.
12. Adjust the spacing of the optional tractor units by sliding them along the
bar, using the clamp lever at the back of each unit to release and lock them
in position. When the lever is up, the unit is released, and when it is down,
the unit is locked.
13. Now close the tractor covers, again making sure that the paper holes are
aligned with the pins on the optional tractor units. If they are not aligned
properly, you will have problems with paper feeding, possibly resulting
in tearing and jamming of the paper.
14. Remove the lever stopper from the slot of the release lever as shown in
Flgure 4-10.
15. Set the release lever to the 'Q" position, and turn the platen knob
clockwise to tighten the paper if it is slack.
35