Selecting The Asf Bin Number - Star Micronics XB24-200 User Manual

3. While holding the I ?%ZZ I button, press the VZZGZGT I but-
ton. The "CURRENT BLAW'message will show on the display to indicate
the current color setting. (In this case, the current color is set black.)
4. If you want to change the color, press the I"' r/b I=CT I
PA&
button while
holding the I ?-z%z~ ] button.
The message on the display will be changed in the following order.
Color
Message
Black
CHANGE BLACK
cyan
CHANGE CYAN
.Ei
Violet
CHANGE VIOLET
Magenta
CHANGE MAGENTA
5. Release both buttons after you set the desired printing color.
If you want to save the selected colorforlater use, store it using the Macro
Definition.
NOTE
: This function is valid only when the color ribbon is installed into the
printer.
Selecting the ASF bin number
Youcanusethedual-bintypeAutomaticSheetFeeder(SF-1ORMII/15RMII)
with this printer.
You can select this ASF bin number by the control panel operation as shown
below:
1. Press the
I ON LINE
1 button to set the printer off-line.
2. Press the I 'ZZGLJ button and hold it down.
3. While holding down the [ ?!'o",",' 1 button, press the
[ PAPER FEED I
button.
The "CURRENT ASF BINl" message (when ASF bin #1 is selected) will
show on the display.
4. Each time you press the
I PAPER FEED
I button while holding down the
MODtz
FONT
I button, the "CHANGE ASF BINl" and the "CHANGE ASF
BIN2" message will be shown on the display.
5. Release both buttons after you set the desired ASF bin number.
NOTE
:This function is valid only when the Dual-bin ASF is selected by the
EDS setting.
55