Star Micronics XB24-200 User Manual page 21

Inierface cable
Fipu Z-5 Connecting the interface cable.
3. Move both clips inside the extended prongs on the sides of the plug until
you hear a click.
Flguru Z-6. Move the clips until you hear a did.
4. Connect the other end of the interface cable to your computer. Use your
computer instructions to attach the interface cable.
NOTE :Because you need your computer when you start printing,
ensure that it is completely installed.
Plug the printer into a suitable outlet. However, DO NOT turn on the power
switch at the front of the printer yet.
NOTE:To disconnect the printer the plug has to be disconnected from the
wall socket, which has to be located close to the printer, and easy to
access.
13