Star Micronics XB24-200 User Manual page 27

9. Squeeze the sides of the stacker attachments lightly, and insert into the
holders on the front part of the sheet feeder.
Stacker
F/gufw *7. Insert the st8cker attachment.
Now, you can use the ASF by installing the paper stack into the hopper.
(Refer to Chapter 4.)
In addition, you can feed a sheet of paper manually by inserting into the slot
at the front of ASF roller as shown in Figure 3-8.
Figwu 36 insert a sheet of paper to feed manually.
NOTE : Set the paper guide and rear cover aside carefully after they have
been removed from the printer. Reverse the procedure described
above when removing the Automatic Sheet Feeder.
19