Font Parameters - Star Micronics XB24-200 User Manual

Display Message
Meaning
A 1 EM l.l LAT ION STD 1 Standard emulation mode is selected.
Al EMULATiON IBM
IBM emulation mode is selected.
A2 RAM BUFFER
RAM is used as the print buffer.
A2 RAM DOWNLOAD
Download commands are enabled.
A2 RAM 1 LINE
1 RAM is used as only one-line buffer.
I
A3 QUIET
OFF
Quiet mode is cancelled.
A3 QUIET ON
Quiet mode is selected.
A4 GRAPH DIR BI
1 Bi-directional printing is selected for graphics.
I - - - .
A4 GRAPH DIR UN1
Uni-directional printing is selected for graphics.
A5 AUTO-ONLINE Y
Auto on-line mode is selected.
A5 AUTO-ONLINE N
Need to press the -1 button to set on-line.
Font parameters
The Font parameters are assigned to Bank "B", including these functions:
l
Mode
Select the mode of font quality.
HS Draft prints with the highest speed, but the dot matrix is reduced to print
faster.
Draft has a reduced dot matrix compared to Letter Quality, but the print
quality is better than the HS Draft.
Letter Quality is refered as LQ, and there are many font styles as shown
below.
The SLQ (Super Letter Quality) is the highest quality of this printer, and
there are three types of font styles.
l
LQ/SLQ Font styles
There are many font styles for LQ and SLQ print mode. You can select one
of them as the pawer-on default by setting this switch.
Optional fonts can be selected only when the corresponding font cartridge
is installed in the printer.
If the corresponding font cartridge is not installed after you selected it with
this EDS mode, the Roman is selected.
61