Star Micronics XB24-200 User Manual page 47

5. Place a single sheet between the guides, placing the side on which you
want to print towards the back of the printer. Gently push the paper down
in the guides until you feel it stop.
6. Now press the m] button. The paper will be fed into the
printer and adjusted past the print head to a position ready for printing.
7. If you want to set the paper to a different position, set the printer off-line
by pressing the I
ON LINE
I button, then set the paper position by
using the micro-feed function. (For details, refer to Chapter 5.)
F/gum 4-13. Loading a single sheet.