Star Micronics XB24-200 User Manual page 4

Chapter 6 - Default settings
This chapter explains how to set the Electronic DIP Switch (EDS) mode to
make system settings on the printer.
Chapter 7 - Printer control commands
This chapter explains the different emulations provided by your printer, and
the software commands used to drive it. This section is of use if you are
writing or modifying programs to take advantage of the printer's features.
Chapter 8 - Download characters
This chapter explains the procedures to create your own characters.
Chapter 9 - MS-DOS and your printer
Since the PSL? or PC-AT family of computers running under MS-DOS is
currently the most popular configuration of microcomputer, we have included
a few hints and tips to help you use your printer with such systems.
Since virtually all PCs are sold with a Microsoft BASIC interpreter, we have
alsoincludedsomehints,andasampleprogmminthislanguagetodemonstrate
the capabilities of the printer.
Chapter 10 - Troubleshooting and maintenance
This section gives a checklist of points to check if your printer is not working
-
in the expected way. It also includes details of some routine maintenance
operations you can carry out yourself. It is not, however, a complete service - -
manual. Call a qualified service engineer if you am unsure of your ability to
carry out any maintenance or servicing operations.
-
Chapter 11 - Reference
This section gives some reference of your printer, such as specifications of
your primer, the pinout of interface connector, the character tables.
The character table charts give the different character sets available.