Table of Contents
Advertisement
chapter 3
DEFAULT SETTINGS
Mostprintersuse a bank of DIP (DualIn-linePackage)switchesinsidethe
printerto achievevariousfunctions.However,this printer can changethe
power-updefaultsettingsby usingtheElectronicDIP Switch(EDS)mode.
This chapterexplainshow to use the EDS mode.
HOW TO SET THE EDS MODE
The
EDSmodehas25kindsoffunctionsyoucansetasthepower-ondefault.
To entertheEDS mode,turntheprinteron whilesimultaneously holdingthe
(
s* TF+CT
),
(PAPER FEED) and (
ON LINE
)
buttons.
In EDS mode,the indicatorsand the buttonson the controlpanel are used
as shownbelowin Figure3-1.
.
Use the[~)button
to selectthe BankNumber.One of the
FONT
indi-
cators will illuminateto showthe selectedBankNumber.
~
Usethe(~)
buttonto selectthe SwitchNumber.Oneof the
PITCH
in-
dicatov will illuminateto showthe selectedSwitchNumber.
The
QUIET
indicatorshowsthe currentsetting.
If you want to set it ON,press the< s(-~~~~<:
r > button.
Press the
(PAPER FEED>button to
print out the currentsettings.
Pressthe( ON
LINE
)button to savethenewsettingsandto exittheEDS
mode.
1
I
Figurs 3-7. Button and indicator functions in the EDS mode
Advertisement
Table of Contents
