Cli: Viewing Port Status And Configuring Port Parameters - HP PROCURVE 2520 Management And Configuration Manual

Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
==========================- CONSOLE - MANAGER MODE -============================
Port Type
---- --------- + -------
1 10/100TX | Yes
2 10/100TX | Yes
3 10/100TX | Yes
4 10/100TX | Yes
5 10/100TX | Yes
6 10/100TX | Yes
7 10/100TX | Yes
8 10/100TX | Yes
9 1000T | Yes
10 1000T | Yes
Figure 10-2. Example of Port/Trunk Settings
2. Press [E] (for Edit). The cursor moves to the Enabled field for the first port.
3. Refer to the online help provided with this screen for further information
4. When you have finished making changes to the above parameters, press
CLI: Viewing Port Status and Configuring Port
Parameters
From the CLI, you can configure and view all port parameter settings and view
all port status indicators.
Port Status and Configuration Commands
10-8
Switch Configuration - Port/Trunk Settings
Enabled Mode
------------
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
on configuration options for these features.
[Enter], then press [S] (for Save).
show interfaces brief
show interfaces config
show interfaces custom
show interfaces port-utilization
show tech transceivers
interface
disable/enable
speed-duplex
flow-control
Flow Ctrl Group Type
--------- ----- -----
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
page 10-9
page 10-10
page 10-11
page 10-14
page 10-14
page 10-16
page 10-16
page 10-16
page 10-17